|  |  | @80 | 9 months | Zed | Added main SYS_DATA structure. | 
                
                  |  |  | @78 | 9 months | Zed | Fixing project to enable DMA for SPI2. | 
                
                  |  |  | @77 | 9 months | Zed | LwIP was removed from the project. | 
                
                  |  |  | @76 | 9 months | Zed | Fixing project before changing NSS control for SPI2 in CubeMX. | 
                
                  |  |  | @75 | 9 months | Zed | FatFs? is working, but without DMA. | 
                
                  |  |  | @74 | 9 months | Zed | FatFs? with DMA were implemented. | 
                
                  |  |  | @73 | 9 months | Zed | FreeRTOS can be compiled without errors. | 
                
                  |  |  | @72 | 9 months | Zed | FreeRTOS was added to the project. | 
                
                  |  |  | @71 | 9 months | Zed | Fixing project before adding support for FreeRTOS. | 
                
                  |  |  | @69 | 9 months | Zed | NetX can be compiled and initialized. | 
                
                  |  |  | @68 | 9 months | Zed | Fixing project before Ethernet implementation. | 
                
                  |  |  | @67 | 9 months | Zed | FAN TACHO RPM was moved changed to use interrupt. | 
                
                  |  |  | @66 | 9 months | Zed | FAN PWM control and TACHO signal measuring are working. | 
                
                  |  |  | @65 | 9 months | Zed | GSM, USB, BLE and GPS are working. | 
                
                  |  |  | @64 | 10 months | Zed | USART3 TX DMA is working. | 
                
                  |  |  | @63 | 10 months | Zed | Fixing project. | 
                
                  |  |  | @62 | 10 months | Zed | GSM STATUS pin is working. | 
                
                  |  |  | @61 | 10 months | Zed | GSM thread was added. | 
                
                  |  |  | @60 | 10 months | Zed | SD card init function was changed not to stop if SD-card not present. | 
                
                  |  |  | @59 | 10 months | Zed | HAL library was updated.
SD DETECT pin is working. | 
                
                  |  |  | @58 | 11 months | Zed | POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested. | 
                
                  |  |  | @57 | 11 months | Zed | FileX is working. | 
                
                  |  |  | @56 | 11 months | Zed | Tick rate was changed to 1000 in CubeMX. | 
                
                  |  |  | @55 | 11 months | Zed | Can be compiled without errors. Fixing before changing tick rate to … | 
                
                  |  |  | @54 | 11 months | Zed | SDMMC(DMA) and Azure_RTOS(with FileX) are activated. | 
                
                  |  |  | @51 | 11 months | Zed | SDMMC low level driver was added. | 
                
                  |  |  | @50 | 11 months | Zed | LED control description were added. | 
                
                  |  |  | @48 | 11 months | Zed | Backlight was turned on for Display. | 
                
                  |  |  | @12 | 11 months | Zed | Added more files to the project. |