source: trunk/firmware/Inc/main.h @ 34

Last change on this file since 34 was 6, checked in by f.jahn, 7 months ago
File size: 5.4 KB
RevLine 
[6]1/* USER CODE BEGIN Header */
2/**
3  ******************************************************************************
4  * @file           : main.h
5  * @brief          : Header for main.c file.
6  *                   This file contains the common defines of the application.
7  ******************************************************************************
8  * @attention
9  *
10  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
11  * All rights reserved.</center></h2>
12  *
13  * This software component is licensed by ST under BSD 3-Clause license,
14  * the "License"; You may not use this file except in compliance with the
15  * License. You may obtain a copy of the License at:
16  *                        opensource.org/licenses/BSD-3-Clause
17  *
18  ******************************************************************************
19  */
20/* USER CODE END Header */
21
22/* Define to prevent recursive inclusion -------------------------------------*/
23#ifndef __MAIN_H
24#define __MAIN_H
25
26#ifdef __cplusplus
27extern "C" {
28#endif
29
30/* Includes ------------------------------------------------------------------*/
31#include "stm32g0xx_hal.h"
32
33
34/* Private includes ----------------------------------------------------------*/
35/* USER CODE BEGIN Includes */
36
37/* USER CODE END Includes */
38
39/* Exported types ------------------------------------------------------------*/
40/* USER CODE BEGIN ET */
41
42/* USER CODE END ET */
43
44/* Exported constants --------------------------------------------------------*/
45/* USER CODE BEGIN EC */
46
47/* USER CODE END EC */
48
49/* Exported macro ------------------------------------------------------------*/
50/* USER CODE BEGIN EM */
51
52/* USER CODE END EM */
53
54/* Exported functions prototypes ---------------------------------------------*/
55void Error_Handler(void);
56
57/* USER CODE BEGIN EFP */
58
59/* USER CODE END EFP */
60
61/* Private defines -----------------------------------------------------------*/
62#define ADC_DATA_READY_Pin GPIO_PIN_9
63#define ADC_DATA_READY_GPIO_Port GPIOB
64#define AIN_U_SHUNT_Pin GPIO_PIN_0
65#define AIN_U_SHUNT_GPIO_Port GPIOA
66//#define ADC_POWER_DOWN_Pin GPIO_PIN_4
67//#define ADC_POWER_DOWN_GPIO_Port GPIOB
68#define ADC_RESET_Pin GPIO_PIN_5
69#define ADC_RESET_GPIO_Port GPIOB
70#define ADC_START_CONV_Pin GPIO_PIN_12
71#define ADC_START_CONV_GPIO_Port GPIOA
72#define ADC_SPI1_NSS_Pin GPIO_PIN_15
73#define ADC_SPI1_NSS_GPIO_Port GPIOA
74#define ADC_SPI1_SCK_Pin GPIO_PIN_5
75#define ADC_SPI1_SCK_GPIO_Port GPIOA
76#define ADC_SPI1_MISO_Pin GPIO_PIN_6
77#define ADC_SPI1_MISO_GPIO_Port GPIOA
78#define ADC_SPI1_MOSI_Pin GPIO_PIN_7
79#define ADC_SPI1_MOSI_GPIO_Port GPIOA
80#define ADC_FAST_P_Pin GPIO_PIN_3
81#define ADC_FAST_P_GPIO_Port GPIOA
82#define ADC_FAST_N_Pin GPIO_PIN_4
83#define ADC_FAST_N_GPIO_Port GPIOA
84#define AIN_VREF_MEAS_Pin GPIO_PIN_2
85#define AIN_VREF_MEAS_GPIO_Port GPIOA
86#define TEMP_SENSOR_Pin GPIO_PIN_2
87#define TEMP_SENSOR_GPIO_Port GPIOB
88#define OVP_ENABLE_Pin GPIO_PIN_8
89#define OVP_ENABLE_GPIO_Port GPIOA
90#define LVP_ENABLE_Pin GPIO_PIN_9
91#define LVP_ENABLE_GPIO_Port GPIOA
92#define BUTTON_Pin GPIO_PIN_6
93#define BUTTON_GPIO_Port GPIOC
94#define LED_FUNCTION_Pin GPIO_PIN_10
95#define LED_FUNCTION_GPIO_Port GPIOA
96#define LED_ERROR_Pin GPIO_PIN_11
97#define LED_ERROR_GPIO_Port GPIOA
98#define RS485_R_Pin GPIO_PIN_6
99#define RS485_R_GPIO_Port GPIOB
100#define RS485_D_Pin GPIO_PIN_7
101#define RS485_D_GPIO_Port GPIOB
102#define AUX_EN_Pin GPIO_PIN_8
103#define AUX_EN_GPIO_Port GPIOB
104/* USER CODE BEGIN Private defines */
105#define LVP_SENSE_MEAS_Pin GPIO_PIN_1
106#define LVP_SENSE_MEAS_GPIO_Port GPIOB
107#define OVP_SENSE_MEAS_Pin GPIO_PIN_0
108#define OVP_SENSE_MEAS_GPIO_Port GPIOB
109
110
111#define AIN_U_BATTERY_PLUS_Pin GPIO_PIN_1
112#define AIN_U_BATTERY_PLUS_GPIO_Port GPIOA
113#define AIN_U_BATTERY_MINUS_Pin GPIO_PIN_2
114#define AIN_U_BATTERY_MINUS_GPIO_Port GPIOA
115
116// mögliche Kommandos für das Command Register
117#define COMMAND_STORE_CONFIG                                                            1
118#define COMMAND_FULL_RESTORE                                                            2
119#define COMMAND_FACTORY_RESTORE                                                         3
120#define COMMAND_RESTORE_LAST_SAVED_VALUES                                       4
121#define COMMAND_RESTART                                                                         6
122#define COMMAND_BATTERY_CURRENT_OFFSET_CAL                                      7
123#define COMMAND_BATTERY_CURRENT_OFFSET_COMMONMODE_CAL           8
124#define COMMAND_BATTERY_CURRENT_OFFSET_TEMP_CAL                         9
125#define COMMAND_BATTERY_CURRENT_GAIN_CAL                                        10
126#define COMMAND_BATTERY_CURRENT_GAIN_TEMP_SHUNT_CAL                     11
127//#define COMMAND_BATTERY_CURRENT_GAIN_TEMP_CHIP_CAL            12
128#define COMMAND_STORE_WITH_SERIAL_NUMBER                                        1234
129#define COMMAND_SET_RDP_LEVEL0                                                          1010
130#define COMMAND_SET_RDP_LEVEL1                                                          1011
131#define COMMAND_SET_RDP_LEVEL1_AND_BOOTSEL                                      1012
132
133enum SOC_CALC_MODE{
134  SOC_CALC_MODE_AH_RATED,
135  SOC_CALC_MODE_AH_AUTO,
136  SOC_CALC_MODE_WH_RATED,
137  SOC_CALC_MODE_WH_AUTO,
138  SOC_CALC_MODE_WH_AUTO_TEMP,
139};
140
141typedef union error_message_t
142{
143        char msg[sizeof(uint64_t)];
144        uint64_t number;
145} error_message_t;
146
147// Defines um printf auszuschalten
148//#define PRINT_BATTERY_CURRENT
149//#define PRINT_BATTERY_VOLTAGE
150//#define PRINT_SHUNT_TEMPERATURE
151//
152//#define PRINT_STM32G0_SHUNTVOLTAGE
153//#define PRINT_STM32G0_CHIPTEMPERATURE
154//#define PRINT_STM32G0_VREF_MEASURE
155
156//#define PRINT_FREQUENCY_MEASURE_RESULT
157
158// Funktionen einkommentieren
159#define DO_HSI16_CALIBRATION
160//#define MCO_TEST_FUNCTION
161//#define CHECK_CHANGED_FREQUENCY
162/* USER CODE END Private defines */
163
164#ifdef __cplusplus
165}
166#endif
167
168#endif /* __MAIN_H */
169
170/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Note: See TracBrowser for help on using the repository browser.