| [6] | 1 | /** |
|---|
| 2 | ****************************************************************************** |
|---|
| 3 | * @file stm32g0xx_hal_conf.h |
|---|
| 4 | * @author MCD Application Team |
|---|
| 5 | * @brief HAL configuration template file. |
|---|
| 6 | ****************************************************************************** |
|---|
| 7 | * @attention |
|---|
| 8 | * |
|---|
| 9 | * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> |
|---|
| 10 | * |
|---|
| 11 | * Redistribution and use in source and binary forms, with or without modification, |
|---|
| 12 | * are permitted provided that the following conditions are met: |
|---|
| 13 | * 1. Redistributions of source code must retain the above copyright notice, |
|---|
| 14 | * this list of conditions and the following disclaimer. |
|---|
| 15 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
|---|
| 16 | * this list of conditions and the following disclaimer in the documentation |
|---|
| 17 | * and/or other materials provided with the distribution. |
|---|
| 18 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
|---|
| 19 | * may be used to endorse or promote products derived from this software |
|---|
| 20 | * without specific prior written permission. |
|---|
| 21 | * |
|---|
| 22 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
|---|
| 23 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
|---|
| 24 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|---|
| 25 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
|---|
| 26 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|---|
| 27 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
|---|
| 28 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|---|
| 29 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
|---|
| 30 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
|---|
| 31 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|---|
| 32 | * |
|---|
| 33 | ****************************************************************************** |
|---|
| 34 | */ |
|---|
| 35 | |
|---|
| 36 | /* Define to prevent recursive inclusion -------------------------------------*/ |
|---|
| 37 | #ifndef STM32G0xx_HAL_CONF_H |
|---|
| 38 | #define STM32G0xx_HAL_CONF_H |
|---|
| 39 | |
|---|
| 40 | #ifdef __cplusplus |
|---|
| 41 | extern "C" { |
|---|
| 42 | #endif |
|---|
| 43 | |
|---|
| 44 | /* Exported types ------------------------------------------------------------*/ |
|---|
| 45 | /* Exported constants --------------------------------------------------------*/ |
|---|
| 46 | |
|---|
| 47 | /* ########################## Module Selection ############################## */ |
|---|
| 48 | /** |
|---|
| 49 | * @brief This is the list of modules to be used in the HAL driver |
|---|
| 50 | */ |
|---|
| 51 | #define HAL_MODULE_ENABLED |
|---|
| 52 | |
|---|
| 53 | #define HAL_ADC_MODULE_ENABLED |
|---|
| 54 | /* #define HAL_CEC_MODULE_ENABLED */ |
|---|
| 55 | /* #define HAL_COMP_MODULE_ENABLED */ |
|---|
| 56 | #define HAL_CRC_MODULE_ENABLED |
|---|
| 57 | /* #define HAL_CRYP_MODULE_ENABLED */ |
|---|
| 58 | /* #define HAL_DAC_MODULE_ENABLED */ |
|---|
| 59 | /* #define HAL_EXTI_MODULE_ENABLED */ |
|---|
| 60 | /* #define HAL_I2C_MODULE_ENABLED */ |
|---|
| 61 | /* #define HAL_I2S_MODULE_ENABLED */ |
|---|
| 62 | /* #define HAL_IWDG_MODULE_ENABLED */ |
|---|
| 63 | /* #define HAL_IRDA_MODULE_ENABLED */ |
|---|
| 64 | /* #define HAL_LPTIM_MODULE_ENABLED */ |
|---|
| 65 | /* #define HAL_RNG_MODULE_ENABLED */ |
|---|
| 66 | #define HAL_RTC_MODULE_ENABLED |
|---|
| 67 | /* #define HAL_SMARTCARD_MODULE_ENABLED */ |
|---|
| 68 | /* #define HAL_SMBUS_MODULE_ENABLED */ |
|---|
| 69 | #define HAL_SPI_MODULE_ENABLED |
|---|
| 70 | #define HAL_TIM_MODULE_ENABLED |
|---|
| 71 | #define HAL_UART_MODULE_ENABLED |
|---|
| 72 | /* #define HAL_USART_MODULE_ENABLED */ |
|---|
| 73 | /* #define HAL_WWDG_MODULE_ENABLED */ |
|---|
| 74 | #define HAL_GPIO_MODULE_ENABLED |
|---|
| 75 | #define HAL_EXTI_MODULE_ENABLED |
|---|
| 76 | #define HAL_DMA_MODULE_ENABLED |
|---|
| 77 | #define HAL_RCC_MODULE_ENABLED |
|---|
| 78 | #define HAL_FLASH_MODULE_ENABLED |
|---|
| 79 | #define HAL_PWR_MODULE_ENABLED |
|---|
| 80 | #define HAL_CORTEX_MODULE_ENABLED |
|---|
| 81 | |
|---|
| 82 | /* ########################## Register Callbacks selection ############################## */ |
|---|
| 83 | /** |
|---|
| 84 | * @brief This is the list of modules where register callback can be used |
|---|
| 85 | */ |
|---|
| 86 | #define USE_HAL_ADC_REGISTER_CALLBACKS 0u |
|---|
| 87 | #define USE_HAL_CEC_REGISTER_CALLBACKS 0u |
|---|
| 88 | #define USE_HAL_COMP_REGISTER_CALLBACKS 0u |
|---|
| 89 | #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u |
|---|
| 90 | #define USE_HAL_DAC_REGISTER_CALLBACKS 0u |
|---|
| 91 | #define USE_HAL_I2C_REGISTER_CALLBACKS 0u |
|---|
| 92 | #define USE_HAL_I2S_REGISTER_CALLBACKS 0u |
|---|
| 93 | #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u |
|---|
| 94 | #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u |
|---|
| 95 | #define USE_HAL_RNG_REGISTER_CALLBACKS 0u |
|---|
| 96 | #define USE_HAL_RTC_REGISTER_CALLBACKS 0u |
|---|
| 97 | #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u |
|---|
| 98 | #define USE_HAL_SPI_REGISTER_CALLBACKS 0u |
|---|
| 99 | #define USE_HAL_TIM_REGISTER_CALLBACKS 0u |
|---|
| 100 | #define USE_HAL_UART_REGISTER_CALLBACKS 0u |
|---|
| 101 | #define USE_HAL_USART_REGISTER_CALLBACKS 0u |
|---|
| 102 | #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u |
|---|
| 103 | |
|---|
| 104 | /* ########################## Oscillator Values adaptation ####################*/ |
|---|
| 105 | /** |
|---|
| 106 | * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. |
|---|
| 107 | * This value is used by the RCC HAL module to compute the system frequency |
|---|
| 108 | * (when HSE is used as system clock source, directly or through the PLL). |
|---|
| 109 | */ |
|---|
| 110 | #if !defined (HSE_VALUE) |
|---|
| 111 | #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ |
|---|
| 112 | #endif /* HSE_VALUE */ |
|---|
| 113 | |
|---|
| 114 | #if !defined (HSE_STARTUP_TIMEOUT) |
|---|
| 115 | #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ |
|---|
| 116 | #endif /* HSE_STARTUP_TIMEOUT */ |
|---|
| 117 | |
|---|
| 118 | /** |
|---|
| 119 | * @brief Internal High Speed oscillator (HSI) value. |
|---|
| 120 | * This value is used by the RCC HAL module to compute the system frequency |
|---|
| 121 | * (when HSI is used as system clock source, directly or through the PLL). |
|---|
| 122 | */ |
|---|
| 123 | #if !defined (HSI_VALUE) |
|---|
| 124 | #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ |
|---|
| 125 | #endif /* HSI_VALUE */ |
|---|
| 126 | |
|---|
| 127 | /** |
|---|
| 128 | * @brief Internal Low Speed oscillator (LSI) value. |
|---|
| 129 | */ |
|---|
| 130 | #if !defined (LSI_VALUE) |
|---|
| 131 | #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ |
|---|
| 132 | #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
|---|
| 133 | The real value may vary depending on the variations |
|---|
| 134 | in voltage and temperature.*/ |
|---|
| 135 | /** |
|---|
| 136 | * @brief External Low Speed oscillator (LSE) value. |
|---|
| 137 | * This value is used by the UART, RTC HAL module to compute the system frequency |
|---|
| 138 | */ |
|---|
| 139 | #if !defined (LSE_VALUE) |
|---|
| 140 | #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ |
|---|
| 141 | #endif /* LSE_VALUE */ |
|---|
| 142 | |
|---|
| 143 | #if !defined (LSE_STARTUP_TIMEOUT) |
|---|
| 144 | #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ |
|---|
| 145 | #endif /* LSE_STARTUP_TIMEOUT */ |
|---|
| 146 | |
|---|
| 147 | /** |
|---|
| 148 | * @brief External clock source for I2S1 peripheral |
|---|
| 149 | * This value is used by the RCC HAL module to compute the I2S1 clock source |
|---|
| 150 | * frequency. |
|---|
| 151 | */ |
|---|
| 152 | #if !defined (EXTERNAL_I2S1_CLOCK_VALUE) |
|---|
| 153 | #define EXTERNAL_I2S1_CLOCK_VALUE 48000U /*!< Value of the I2S1 External clock source in Hz*/ |
|---|
| 154 | #endif /* EXTERNAL_I2S1_CLOCK_VALUE */ |
|---|
| 155 | |
|---|
| 156 | /* Tip: To avoid modifying this file each time you need to use different HSE, |
|---|
| 157 | === you can define the HSE value in your toolchain compiler preprocessor. */ |
|---|
| 158 | |
|---|
| 159 | /* ########################### System Configuration ######################### */ |
|---|
| 160 | /** |
|---|
| 161 | * @brief This is the HAL system configuration section |
|---|
| 162 | */ |
|---|
| 163 | #define VDD_VALUE 3300U /*!< Value of VDD in mv */ |
|---|
| 164 | #define TICK_INT_PRIORITY 1U /*!< tick interrupt priority */ |
|---|
| 165 | #define USE_RTOS 0U |
|---|
| 166 | #define PREFETCH_ENABLE 1U |
|---|
| 167 | #define INSTRUCTION_CACHE_ENABLE 1U |
|---|
| 168 | |
|---|
| 169 | /* ################## SPI peripheral configuration ########################## */ |
|---|
| 170 | |
|---|
| 171 | /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver |
|---|
| 172 | * Activated: CRC code is present inside driver |
|---|
| 173 | * Deactivated: CRC code cleaned from driver |
|---|
| 174 | */ |
|---|
| 175 | |
|---|
| 176 | #define USE_SPI_CRC 0U |
|---|
| 177 | |
|---|
| 178 | /* ################## CRYP peripheral configuration ########################## */ |
|---|
| 179 | |
|---|
| 180 | #define USE_HAL_CRYP_SUSPEND_RESUME 1U |
|---|
| 181 | |
|---|
| 182 | /* ########################## Assert Selection ############################## */ |
|---|
| 183 | /** |
|---|
| 184 | * @brief Uncomment the line below to expanse the "assert_param" macro in the |
|---|
| 185 | * HAL drivers code |
|---|
| 186 | */ |
|---|
| 187 | /* #define USE_FULL_ASSERT 1U */ |
|---|
| 188 | |
|---|
| 189 | /* Includes ------------------------------------------------------------------*/ |
|---|
| 190 | /** |
|---|
| 191 | * @brief Include module's header file |
|---|
| 192 | */ |
|---|
| 193 | |
|---|
| 194 | #ifdef HAL_RCC_MODULE_ENABLED |
|---|
| 195 | #include "stm32g0xx_hal_rcc.h" |
|---|
| 196 | #endif /* HAL_RCC_MODULE_ENABLED */ |
|---|
| 197 | |
|---|
| 198 | #ifdef HAL_GPIO_MODULE_ENABLED |
|---|
| 199 | #include "stm32g0xx_hal_gpio.h" |
|---|
| 200 | #endif /* HAL_GPIO_MODULE_ENABLED */ |
|---|
| 201 | |
|---|
| 202 | #ifdef HAL_DMA_MODULE_ENABLED |
|---|
| 203 | #include "stm32g0xx_hal_dma.h" |
|---|
| 204 | #endif /* HAL_DMA_MODULE_ENABLED */ |
|---|
| 205 | |
|---|
| 206 | #ifdef HAL_CORTEX_MODULE_ENABLED |
|---|
| 207 | #include "stm32g0xx_hal_cortex.h" |
|---|
| 208 | #endif /* HAL_CORTEX_MODULE_ENABLED */ |
|---|
| 209 | |
|---|
| 210 | #ifdef HAL_ADC_MODULE_ENABLED |
|---|
| 211 | #include "stm32g0xx_hal_adc.h" |
|---|
| 212 | #include "stm32g0xx_hal_adc_ex.h" |
|---|
| 213 | #endif /* HAL_ADC_MODULE_ENABLED */ |
|---|
| 214 | |
|---|
| 215 | #ifdef HAL_CEC_MODULE_ENABLED |
|---|
| 216 | #include "stm32g0xx_hal_cec.h" |
|---|
| 217 | #endif /* HAL_CEC_MODULE_ENABLED */ |
|---|
| 218 | |
|---|
| 219 | #ifdef HAL_COMP_MODULE_ENABLED |
|---|
| 220 | #include "stm32g0xx_hal_comp.h" |
|---|
| 221 | #endif /* HAL_COMP_MODULE_ENABLED */ |
|---|
| 222 | |
|---|
| 223 | #ifdef HAL_CRC_MODULE_ENABLED |
|---|
| 224 | #include "stm32g0xx_hal_crc.h" |
|---|
| 225 | #endif /* HAL_CRC_MODULE_ENABLED */ |
|---|
| 226 | |
|---|
| 227 | #ifdef HAL_CRYP_MODULE_ENABLED |
|---|
| 228 | #include "stm32g0xx_hal_cryp.h" |
|---|
| 229 | #endif /* HAL_CRYP_MODULE_ENABLED */ |
|---|
| 230 | |
|---|
| 231 | #ifdef HAL_DAC_MODULE_ENABLED |
|---|
| 232 | #include "stm32g0xx_hal_dac.h" |
|---|
| 233 | #endif /* HAL_DAC_MODULE_ENABLED */ |
|---|
| 234 | |
|---|
| 235 | #ifdef HAL_EXTI_MODULE_ENABLED |
|---|
| 236 | #include "stm32g0xx_hal_exti.h" |
|---|
| 237 | #endif /* HAL_EXTI_MODULE_ENABLED */ |
|---|
| 238 | |
|---|
| 239 | #ifdef HAL_FLASH_MODULE_ENABLED |
|---|
| 240 | #include "stm32g0xx_hal_flash.h" |
|---|
| 241 | #endif /* HAL_FLASH_MODULE_ENABLED */ |
|---|
| 242 | |
|---|
| 243 | #ifdef HAL_I2C_MODULE_ENABLED |
|---|
| 244 | #include "stm32g0xx_hal_i2c.h" |
|---|
| 245 | #endif /* HAL_I2C_MODULE_ENABLED */ |
|---|
| 246 | |
|---|
| 247 | #ifdef HAL_I2S_MODULE_ENABLED |
|---|
| 248 | #include "stm32g0xx_hal_i2s.h" |
|---|
| 249 | #endif /* HAL_I2S_MODULE_ENABLED */ |
|---|
| 250 | |
|---|
| 251 | #ifdef HAL_IRDA_MODULE_ENABLED |
|---|
| 252 | #include "stm32g0xx_hal_irda.h" |
|---|
| 253 | #endif /* HAL_IRDA_MODULE_ENABLED */ |
|---|
| 254 | |
|---|
| 255 | #ifdef HAL_IWDG_MODULE_ENABLED |
|---|
| 256 | #include "stm32g0xx_hal_iwdg.h" |
|---|
| 257 | #endif /* HAL_IWDG_MODULE_ENABLED */ |
|---|
| 258 | |
|---|
| 259 | #ifdef HAL_LPTIM_MODULE_ENABLED |
|---|
| 260 | #include "stm32g0xx_hal_lptim.h" |
|---|
| 261 | #endif /* HAL_LPTIM_MODULE_ENABLED */ |
|---|
| 262 | |
|---|
| 263 | #ifdef HAL_PWR_MODULE_ENABLED |
|---|
| 264 | #include "stm32g0xx_hal_pwr.h" |
|---|
| 265 | #endif /* HAL_PWR_MODULE_ENABLED */ |
|---|
| 266 | |
|---|
| 267 | #ifdef HAL_RNG_MODULE_ENABLED |
|---|
| 268 | #include "stm32g0xx_hal_rng.h" |
|---|
| 269 | #endif /* HAL_RNG_MODULE_ENABLED */ |
|---|
| 270 | |
|---|
| 271 | #ifdef HAL_RTC_MODULE_ENABLED |
|---|
| 272 | #include "stm32g0xx_hal_rtc.h" |
|---|
| 273 | #endif /* HAL_RTC_MODULE_ENABLED */ |
|---|
| 274 | |
|---|
| 275 | #ifdef HAL_SMARTCARD_MODULE_ENABLED |
|---|
| 276 | #include "stm32g0xx_hal_smartcard.h" |
|---|
| 277 | #endif /* HAL_SMARTCARD_MODULE_ENABLED */ |
|---|
| 278 | |
|---|
| 279 | #ifdef HAL_SMBUS_MODULE_ENABLED |
|---|
| 280 | #include "stm32g0xx_hal_smbus.h" |
|---|
| 281 | #endif /* HAL_SMBUS_MODULE_ENABLED */ |
|---|
| 282 | |
|---|
| 283 | #ifdef HAL_SPI_MODULE_ENABLED |
|---|
| 284 | #include "stm32g0xx_hal_spi.h" |
|---|
| 285 | #endif /* HAL_SPI_MODULE_ENABLED */ |
|---|
| 286 | |
|---|
| 287 | #ifdef HAL_TIM_MODULE_ENABLED |
|---|
| 288 | #include "stm32g0xx_hal_tim.h" |
|---|
| 289 | #endif /* HAL_TIM_MODULE_ENABLED */ |
|---|
| 290 | |
|---|
| 291 | #ifdef HAL_UART_MODULE_ENABLED |
|---|
| 292 | #include "stm32g0xx_hal_uart.h" |
|---|
| 293 | #endif /* HAL_UART_MODULE_ENABLED */ |
|---|
| 294 | |
|---|
| 295 | #ifdef HAL_USART_MODULE_ENABLED |
|---|
| 296 | #include "stm32g0xx_hal_usart.h" |
|---|
| 297 | #endif /* HAL_USART_MODULE_ENABLED */ |
|---|
| 298 | |
|---|
| 299 | #ifdef HAL_WWDG_MODULE_ENABLED |
|---|
| 300 | #include "stm32g0xx_hal_wwdg.h" |
|---|
| 301 | #endif /* HAL_WWDG_MODULE_ENABLED */ |
|---|
| 302 | |
|---|
| 303 | /* Exported macro ------------------------------------------------------------*/ |
|---|
| 304 | #ifdef USE_FULL_ASSERT |
|---|
| 305 | /** |
|---|
| 306 | * @brief The assert_param macro is used for functions parameters check. |
|---|
| 307 | * @param expr If expr is false, it calls assert_failed function |
|---|
| 308 | * which reports the name of the source file and the source |
|---|
| 309 | * line number of the call that failed. |
|---|
| 310 | * If expr is true, it returns no value. |
|---|
| 311 | * @retval None |
|---|
| 312 | */ |
|---|
| 313 | #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) |
|---|
| 314 | /* Exported functions ------------------------------------------------------- */ |
|---|
| 315 | void assert_failed(uint8_t *file, uint32_t line); |
|---|
| 316 | #else |
|---|
| 317 | #define assert_param(expr) ((void)0U) |
|---|
| 318 | #endif /* USE_FULL_ASSERT */ |
|---|
| 319 | |
|---|
| 320 | #ifdef __cplusplus |
|---|
| 321 | } |
|---|
| 322 | #endif |
|---|
| 323 | |
|---|
| 324 | #endif /* STM32G0xx_HAL_CONF_H */ |
|---|
| 325 | |
|---|
| 326 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
|---|
