source: trunk/firmware/Release250A/firmware_files.ind @ 26

Last change on this file since 26 was 26, checked in by f.jahn, 7 weeks ago
  • Bug in ADC Kalibrierung (STM32 ADC Strom) behoben
  • DMA Buffer für ADC 1 und ADC wird vor Überschreibung während bearbeitung geschützt, indem Datenübertragung nur einmalig erfolgt und erst nach Auswertung wieder gestartet wird
  • RS485Modbus: Timeout Zeit wird für Baudraten >19200 korrekt berechnet
  • Hardware ID geändert
  • Separates Register für "Batterie Empty detection mode" auf Adresse 92 angelegt
File size: 3.8 KB
RevLine 
[26]1"Release250A/stm32g0xx_hal.bc"
2"Release250A/stm32g0xx_hal_adc.bc"
3"Release250A/stm32g0xx_hal_adc_ex.bc"
4"Release250A/stm32g0xx_hal_cec.bc"
5"Release250A/stm32g0xx_hal_comp.bc"
6"Release250A/stm32g0xx_hal_cortex.bc"
7"Release250A/stm32g0xx_hal_crc.bc"
8"Release250A/stm32g0xx_hal_crc_ex.bc"
9"Release250A/stm32g0xx_hal_cryp.bc"
10"Release250A/stm32g0xx_hal_cryp_ex.bc"
11"Release250A/stm32g0xx_hal_dac.bc"
12"Release250A/stm32g0xx_hal_dac_ex.bc"
13"Release250A/stm32g0xx_hal_dma.bc"
14"Release250A/stm32g0xx_hal_dma_ex.bc"
15"Release250A/stm32g0xx_hal_exti.bc"
16"Release250A/stm32g0xx_hal_flash.bc"
17"Release250A/stm32g0xx_hal_flash_ex.bc"
18"Release250A/stm32g0xx_hal_gpio.bc"
19"Release250A/stm32g0xx_hal_i2c.bc"
20"Release250A/stm32g0xx_hal_i2c_ex.bc"
21"Release250A/stm32g0xx_hal_i2s.bc"
22"Release250A/stm32g0xx_hal_irda.bc"
23"Release250A/stm32g0xx_hal_iwdg.bc"
24"Release250A/stm32g0xx_hal_lptim.bc"
25"Release250A/stm32g0xx_hal_pwr.bc"
26"Release250A/stm32g0xx_hal_pwr_ex.bc"
27"Release250A/stm32g0xx_hal_rcc.bc"
28"Release250A/stm32g0xx_hal_rcc_ex.bc"
29"Release250A/stm32g0xx_hal_rng.bc"
30"Release250A/stm32g0xx_hal_rtc.bc"
31"Release250A/stm32g0xx_hal_rtc_ex.bc"
32"Release250A/stm32g0xx_hal_smartcard.bc"
33"Release250A/stm32g0xx_hal_smartcard_ex.bc"
34"Release250A/stm32g0xx_hal_smbus.bc"
35"Release250A/stm32g0xx_hal_spi.bc"
36"Release250A/stm32g0xx_hal_spi_ex.bc"
37"Release250A/stm32g0xx_hal_tim.bc"
38"Release250A/stm32g0xx_hal_tim_ex.bc"
39"Release250A/stm32g0xx_hal_uart.bc"
40"Release250A/stm32g0xx_hal_uart_ex.bc"
41"Release250A/stm32g0xx_hal_usart.bc"
42"Release250A/stm32g0xx_hal_usart_ex.bc"
43"Release250A/stm32g0xx_hal_wwdg.bc"
44"Release250A/stm32g0xx_ll_adc.bc"
45"Release250A/stm32g0xx_ll_comp.bc"
46"Release250A/stm32g0xx_ll_crc.bc"
47"Release250A/stm32g0xx_ll_dac.bc"
48"Release250A/stm32g0xx_ll_dma.bc"
49"Release250A/stm32g0xx_ll_exti.bc"
50"Release250A/stm32g0xx_ll_gpio.bc"
51"Release250A/stm32g0xx_ll_i2c.bc"
52"Release250A/stm32g0xx_ll_lptim.bc"
53"Release250A/stm32g0xx_ll_lpuart.bc"
54"Release250A/stm32g0xx_ll_pwr.bc"
55"Release250A/stm32g0xx_ll_rcc.bc"
56"Release250A/stm32g0xx_ll_rng.bc"
57"Release250A/stm32g0xx_ll_rtc.bc"
58"Release250A/stm32g0xx_ll_spi.bc"
59"Release250A/stm32g0xx_ll_tim.bc"
60"Release250A/stm32g0xx_ll_ucpd.bc"
61"Release250A/stm32g0xx_ll_usart.bc"
62"Release250A/stm32g0xx_ll_utils.bc"
63"Release250A/hsi16 _calibration.bc"
64"Release250A/hsi16.bc"
[6]65"Release250A/SEGGER_THUMB_Startup.o"
66"Release250A/STM32G0xx_Startup.o"
[26]67"Release250A/modbus.bc"
[6]68"Release250A/STM32G07x_Vectors.o"
[26]69"Release250A/adc.bc"
70"Release250A/ads1260.bc"
71"Release250A/ah_counter.bc"
72"Release250A/battery_voltage.bc"
73"Release250A/chip_temperature.bc"
74"Release250A/dma.bc"
75"Release250A/eeprom.bc"
76"Release250A/efficiency.bc"
77"Release250A/esr.bc"
78"Release250A/fast_current.bc"
79"Release250A/gpio.bc"
80"Release250A/main.bc"
81"Release250A/outputs.bc"
82"Release250A/ref_voltage.bc"
83"Release250A/rtc.bc"
84"Release250A/self_discharge.bc"
85"Release250A/shunt_temperature.bc"
86"Release250A/shunt_voltage.bc"
87"Release250A/spi.bc"
88"Release250A/stm32g0xx_hal_msp.bc"
89"Release250A/stm32g0xx_it.bc"
90"Release250A/sysdata.bc"
91"Release250A/system_stm32g0xx.bc"
92"Release250A/template.bc"
93"Release250A/usart.bc"
94"Release250A/wh_counter.bc"
95"C:/Program Files/SEGGER/SEGGER Embedded Studio 8.22a/lib/libc_v6m_t_le_eabi_balanced.a"
96"C:/Program Files/SEGGER/SEGGER Embedded Studio 8.22a/lib/SEGGER_crtinit_v6m_t_le_eabi_balanced.a"
97"C:/Program Files/SEGGER/SEGGER Embedded Studio 8.22a/lib/prinops_rtt_v6m_t_le_eabi_balanced.a"
98"C:/Program Files/SEGGER/SEGGER Embedded Studio 8.22a/lib/heapops_basic_v6m_t_le_eabi_balanced.a"
99"C:/Program Files/SEGGER/SEGGER Embedded Studio 8.22a/lib/heapops_disable_interrupts_locking_v6m_t_le_eabi_balanced.a"
100"C:/Program Files/SEGGER/SEGGER Embedded Studio 8.22a/lib/strops_v6m_t_le_eabi_balanced.a"
101"C:/Program Files/SEGGER/SEGGER Embedded Studio 8.22a/lib/mbops_timeops_v6m_t_le_eabi_balanced.a"
Note: See TracBrowser for help on using the repository browser.