Context Navigation

eeprom.c @ 30

Last change on this file since 30 was 26, checked in by f.jahn, 7 weeks ago

Bug in ADC Kalibrierung (STM32 ADC Strom) behoben
DMA Buffer für ADC 1 und ADC wird vor Überschreibung während bearbeitung geschützt, indem Datenübertragung nur einmalig erfolgt und erst nach Auswertung wieder gestartet wird
RS485Modbus: Timeout Zeit wird für Baudraten >19200 korrekt berechnet
Hardware ID geändert
Separates Register für "Batterie Empty detection mode" auf Adresse 92 angelegt

File size: 55.3 KB

Line
1	#include <assert.h>
2
3	#include "eeprom.h"
4	#include "stdio.h"
5
6	#define CONCAT(a, b) CONCAT_INNER(a, b) // These three macros
7	#define CONCAT_INNER(a, b) a ## b // generate unique variables
8	#define UNIQUE_NAME(base) CONCAT(base, __COUNTER__) // according to template "baseX", like "base1", "base2" and etc
9
10	/********************************************************/
11
12	// Eeprom state related defines
13
14	/***************EEPROM_EMULATOR**********************/
15
16	typedef struct
17	{
18	// Schnittstellenparameter
19	uint32_t baudrate;
20	uint16_t parityMode;
21	uint16_t stopBits;
22	uint16_t slave_adress;
23	uint16_t ibn_day;
24	uint16_t ibn_month;
25	uint16_t ibn_year;
26	uint16_t user_id;
27
28	// Offset und Gain
29	int16_t batteryCurrentOffsetRefTemperatureShunt;
30	int16_t batteryCurrentOffsetRefTemperatureChip;
31	int16_t batteryCurrentGainRefTempShunt;
32	int16_t batteryCurrentGainRefTempChip;
33	int16_t batteryCurrentOffsetTemperatureCalibrationTemperature;
34	int16_t batteryCurrentGainTemperatureCalibrationShuntTemperature;
35	int16_t batteryCurrentGainTemperatureCalibrationChipTemperature;
36	int32_t batteryCurrentOffsetRefshuntVoltage;
37	int32_t batteryCurrentOffsetCommonModeCalibrationVoltage;
38	int32_t batteryCurrentOffsetCommonModeCompensationFactor;
39	int32_t batteryCurrentOffsetTemperatureCompensationFactor;
40	int32_t batteryCurrentGainRefCurrent;
41	int32_t batteryCurrentGainTemperatureCompensationShuntFactor;
42	int32_t batteryCurrentGainTemperatureCompensationChipFactor;
43
44	int32_t currentOffset;
45	uint32_t currentGain;
46
47	int64_t mAsCounter;
48	int32_t detectedCapacity;
49	int32_t detectedEnergy;
50	int64_t mAs_AutoMode; // 160-163 Helps to restore current SoC after Reset or Shutdown
51	int64_t mWs_AutoMode; // 164-167 Helps to restore current SoC after Reset or Shutdown
52
53	// battery parameter
54	uint16_t cef;
55	uint16_t peukert;
56	uint32_t cellCapacity;
57	uint32_t cellEnergy;
58	uint16_t iBatFull;
59	uint16_t tBatFull;
60	uint16_t uBatFull;
61	uint16_t uBatEmpty;
62	uint8_t socCalcMode;
63	uint16_t cellRatedDischargeTime;
64
65	// Schaltausgänge
66	uint16_t lvpStart; // Spannung ab der die LOW Voltage Protection aktiv wird in mV
67	uint16_t lvpStop; // Spannung ab der die LOW Voltage Protection wieder inaktiv wird
68	uint16_t ovpStart; // Spannung ab der die OVER Voltage Protection aktiv wird in mV
69	uint16_t ovpStop; // Spannung ab der die OVER Voltage Protection wieder inaktiv wird
70	int16_t loadCurrentLimit; // maximaler Laststrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Laststrom Protection aktiv
71	int16_t chargeCurrentLimit; // maximaler Ladestrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Ladestrom Protection aktiv
72	int16_t chargeStopHighTemperatureStart; // Abschalttemperatur Ladung wegen zu hoher Temperatur
73	int16_t chargeStopHighTemperatureStop; // Wiedereinschalttemperatur
74	int16_t chargeStopLowTemperatureStart; // Abschalttemperatur Ladung wegen zu niedriger Temperatur
75	int16_t chargeStopLowTemperatureStop; // Wiedereinschalttemperatur
76	int16_t dischargeStopHighTemperatureStart; // Abschalttemperatur Entladung wegen zu hoher Temperatur
77	int16_t dischargeStopHighTemperatureStop; // Wiedereinschalttemperatur
78	int16_t dischargeStopLowTemperatureStart; // Abschalttemperatur EntLadung wegen zu niedriger Temperatur
79	int16_t dischargeStopLowTemperatureStop; // Wiedereinschalttemperatur
80
81	int16_t uBatEmptyCompStartTemp; // We start calculating uBatEmpty compensations only when cell temperature is lower than this value
82	int16_t uBatEmptyCompStopTemp; // We stop calculating uBatEmpty compensations when cell temperature is lower than this value
83	uint16_t uBatEmptyCompStopVolt; // uBatEmpty Voltage at temperatures lower than lvpCompStopTemp
84
85	int16_t extraDischargeStrom_mA; // For example, current that consumes LiPro itself
86	uint32_t dischargeTotalAh;
87	uint32_t chargeTotalAh;
88	uint32_t dischargeTotalWh; // 154-155 [mAs]
89	uint32_t chargeTotalWh; // 156-157 [mAs]
90
91	uint16_t cefW;
92	uint32_t onTime;
93
94	} eeprom_data_t;
95
96	typedef struct
97	{
98	// Schnittstellenparameter
99	uint32_t baudrate;
100	uint16_t parityMode;
101	uint16_t stopBits;
102	uint16_t slave_adress;
103	uint16_t ibn_day;
104	uint16_t ibn_month;
105	uint16_t ibn_year;
106	uint16_t user_id;
107
108	// Offset und Gain
109	int16_t batteryCurrentOffsetRefTemperatureShunt;
110	int16_t batteryCurrentOffsetRefTemperatureChip;
111	int16_t batteryCurrentGainRefTempShunt;
112	int16_t batteryCurrentGainRefTempChip;
113	int16_t batteryCurrentOffsetTemperatureCalibrationTemperature;
114	int16_t batteryCurrentGainTemperatureCalibrationShuntTemperature;
115	int16_t batteryCurrentGainTemperatureCalibrationChipTemperature;
116	int32_t batteryCurrentOffsetRefshuntVoltage;
117	int32_t batteryCurrentOffsetCommonModeCalibrationVoltage;
118	int32_t batteryCurrentOffsetCommonModeCompensationFactor;
119	int32_t batteryCurrentOffsetTemperatureCompensationFactor;
120	int32_t batteryCurrentGainRefCurrent;
121	int32_t batteryCurrentGainTemperatureCompensationShuntFactor;
122	int32_t batteryCurrentGainTemperatureCompensationChipFactor;
123
124	int32_t currentOffset;
125	uint32_t currentGain;
126
127	int64_t mAsCounter;
128	int32_t detectedCapacity;
129	int32_t detectedEnergy;
130	int32_t mAh_AutoMode;
131	int32_t mWh_AutoMode;
132
133	// battery parameter
134	uint16_t cef;
135	uint16_t peukert;
136	uint32_t cellCapacity;
137	uint32_t cellEnergy;
138	uint16_t iBatFull;
139	uint16_t tBatFull;
140	uint16_t uBatFull;
141	uint16_t uBatEmpty;
142	uint8_t socCalcMode;
143	uint16_t cellRatedDischargeTime;
144
145	// Schaltausgänge
146	uint16_t lvpStart; // Spannung ab der die LOW Voltage Protection aktiv wird in mV
147	uint16_t lvpStop; // Spannung ab der die LOW Voltage Protection wieder inaktiv wird
148	uint16_t ovpStart; // Spannung ab der die OVER Voltage Protection aktiv wird in mV
149	uint16_t ovpStop; // Spannung ab der die OVER Voltage Protection wieder inaktiv wird
150	int16_t loadCurrentLimit; // maximaler Laststrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Laststrom Protection aktiv
151	int16_t chargeCurrentLimit; // maximaler Ladestrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Ladestrom Protection aktiv
152	int16_t chargeStopHighTemperatureStart; // Abschalttemperatur Ladung wegen zu hoher Temperatur
153	int16_t chargeStopHighTemperatureStop; // Wiedereinschalttemperatur
154	int16_t chargeStopLowTemperatureStart; // Abschalttemperatur Ladung wegen zu niedriger Temperatur
155	int16_t chargeStopLowTemperatureStop; // Wiedereinschalttemperatur
156	int16_t dischargeStopHighTemperatureStart; // Abschalttemperatur Entladung wegen zu hoher Temperatur
157	int16_t dischargeStopHighTemperatureStop; // Wiedereinschalttemperatur
158	int16_t dischargeStopLowTemperatureStart; // Abschalttemperatur EntLadung wegen zu niedriger Temperatur
159	int16_t dischargeStopLowTemperatureStop; // Wiedereinschalttemperatur
160
161	int16_t uBatEmptyCompStartTemp; // We start calculating uBatEmpty compensations only when cell temperature is lower than this value
162	int16_t uBatEmptyCompStopTemp; // We stop calculating uBatEmpty compensations when cell temperature is lower than this value
163	uint16_t uBatEmptyCompStopVolt; // uBatEmpty Voltage at temperatures lower than lvpCompStopTemp
164
165	int16_t extraDischargeStrom_mA; // For example, current that consumes LiPro itself
166	uint32_t dischargeTotalAh;
167	uint32_t chargeTotalAh;
168	uint32_t dischargeTotalWh; // 154-155 [mAs]
169	uint32_t chargeTotalWh; // 156-157 [mAs]
170
171	uint16_t cefW;
172	uint32_t onTime;
173
174	}eeprom_old_data_t;
175
176	// Substitute for #if sizeof(some_type) == sizeof(another_type) functionality
177	#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
178
179	typedef struct
180	{
181	// Geräteinformation
182	uint32_t SN;
183	uint8_t deviceInfoWritten;
184	uint8_t UNIQUE_NAME(reserved)[3];
185	}device_info_t;
186
187	typedef struct
188	{
189	// Eeprom Status Infos
190	uint8_t firstStartId;
191	uint8_t UNIQUE_NAME(reserved)[3];
192	uint16_t structureSize;
193	uint16_t revisionInfo;
194	uint32_t writeCounter;
195	}eeprom_state_t;
196
197	// fasse zu einer Struktur zusammen um nachher einfach darauf zugreifen zu können
198	typedef struct
199	{
200	eeprom_state_t eepromState;
201	device_info_t deviceInfo;
202	eeprom_data_t changedData;
203	}eeprom_stored_data_t;
204
205	typedef struct
206	{
207	eeprom_state_t eepromState;
208	device_info_t deviceInfo;
209	eeprom_old_data_t changedData;
210	}eeprom_stored_old_data_t;
211
212
213	// Flash related defines
214	#define USER_FLASH_BASE_ADRESS FLASH_BASE // 0x08000000
215	#define USER_FLASH_SIZE FLASH_SIZE // 0x00020000 - 128 kB
216	#define USER_FLASH_END (USER_FLASH_BASE_ADRESS + USER_FLASH_SIZE) // 0x08020000
217	#define USER_FLASH_PAGE_SIZE (0x800) //- 2 kB
218
219	// Eeprom emulator related defines
220	#define NUMBER_OF_PAGES (1U)
221	#define USER_EEPROM_BASE_ADRESS (USER_FLASH_END - (USER_FLASH_PAGE_SIZE * NUMBER_OF_PAGES)) // 0x0801F800 - EEPROM start address (CONFIG_ID location)
222
223	// Data to store reated defines
224	//#define SIZEOF_DEFAULT_EEPROM_DATA (sizeof(eeprom_new_data_t))
225	#define SIZEOF_CHANGED_EEPROM_DATA (sizeof(eeprom_data_t))
226	#define SIZEOF_CHANGED_EEPROM_OLD_DATA (sizeof(eeprom_old_data_t))
227	#define SIZEOF_DEVICE_INFO (sizeof(device_info_t))
228	#define SIZEOF_EEPROM_STATE (sizeof(eeprom_state_t))
229
230	#define SIZE_OF_DATA_TO_STORE (SIZEOF_CHANGED_EEPROM_DATA + SIZEOF_DEVICE_INFO + SIZEOF_EEPROM_STATE)
231	#define SIZE_OF_OLD_DATA_TO_STORE (SIZEOF_CHANGED_EEPROM_OLD_DATA + SIZEOF_DEVICE_INFO + SIZEOF_EEPROM_STATE)
232
233	// Adress related defines
234	#define EEPROM_ADRESS_FIRST_START_ID (USER_EEPROM_BASE_ADRESS)// - 1 + SIZE_OF_DATA_TO_STORE - 1 - SIZEOF_DEVICE_INFO - 1 - 1)
235	#define FIRST_START_ID (0xFF)
236	#define CONFIG_ID (57) // Increment by 1 to make compartible update, more than 1 - incompartible
237	#if CONFIG_ID == FIRST_START_ID
238	#error "CONFIG_ID must not be equal to FIRST_START_ID!!! Calibration data will be erased!!!"
239	#endif
240
241	static uint32_t GetPage(uint32_t Address);
242	static HAL_StatusTypeDef getEEPROMData(uint32_t address, uint8_t * data, uint32_t len);
243
244	// muss modulo 8 noch hinzufügen wg 8 byte alignement
245	static uint64_t eepromData[(SIZE_OF_DATA_TO_STORE / 8) + 1];
246	static uint64_t eepromOldData[(SIZE_OF_OLD_DATA_TO_STORE / 8) + 1];
247
248	static FLASH_EraseInitTypeDef EraseInitStruct = {0};
249
250	static const eeprom_data_t defaultEepromData =
251	{
252	// Schnittstellenparameter
253
254	/* baudrate */ 19200, // uint32_t baudrate;
255	/* parityMode */ 0, // uint16_t parityMode;
256	/* stopBits */ 1, // uint16_t stopBits;
257	/* slave_adress */ 1, // uint16_t slave_adress;
258	/* ibn_day */ 0, // ibm_day
259	/* ibn_month */ 0, // ibm_month
260	/* ibn_year */ 0, // ibm_year
261	/* user_id */ 0, // user id
262
263	// Offset und Gain
264
265	/* batteryCurrentOffsetRefTemperatureShunt */ 0, // int16_t batteryCurrentOffsetRefTemperatureShunt;
266	/* batteryCurrentOffsetRefTemperatureChip */ 0, // int16_t batteryCurrentOffsetRefTemperatureChip
267	/* batteryCurrentGainRefTempShunt */ 0, // int16_t batteryCurrentGainRefTempShunt;
268	/* batteryCurrentGainRefTempChip */ 0, // int16_t batteryCurrentGainRefTempShip
269	/* batteryCurrentOffsetTemperatureCalibrationTemperature */ 0, // int16_t batteryCurrentOffsetTemperatureCalibrationTemperature;
270	/* batteryCurrentGainTemperatureCalibrationShuntTemperature */ 0, // int16_t batteryCurrentGainTemperatureCalibrationShuntTemperature;
271	/* batteryCurrentGainTemperatureCalibrationChipTemperature */ 0, // int16_t batteryCurrentGainTemperatureCalibrationChipTemperature;
272	/* batteryCurrentOffsetRefshuntVoltage */ 0, // int32_t batteryCurrentOffsetRefshuntVoltage;
273	/* batteryCurrentOffsetCommonModeCalibrationVoltage */ 0, // int32_t batteryCurrentOffsetCommonModeCalibrationVoltage;
274	/* batteryCurrentOffsetTemperatureCompensationFactor */ 0, // int32_t batteryCurrentOffsetTemperatureCompensationFactor;
275	/* batteryCurrentOffsetCommonModeCompensationFactor */ 0, // int32_t batteryCurrentOffsetCommonModeCompensationFactor;
276	/* batteryCurrentGainRefCurrent */ 250000, // int32_t batteryCurrentGainRefCurrent;
277	/* batteryCurrentGainTemperatureCompensationShuntFactor */ 0, // int32_t batteryCurrentGainTemperatureCompensationShuntFactor;
278	/* batteryCurrentGainTemperatureCompensationChipFactor */ 0, // int32_t batteryCurrentGainTemperatureCompensationChipFactor;
279
280	/* currentOffset */ 0, //int32_t currentOffset;
281	/* currentGain */ 1000000, //uint32_t currentGain;
282
283	/* mAsCounter */ 0, // mAsCounter
284	/* detectedCapacity */ -1, // detectedCapacity
285	/* detectedEnergy */ -1, // detectedEnergy
286	/* mAs_AutoMode / (-100000LL3600LL), // mAs_AutoMode = cellCapacity*3600,
287	/* mWs_AutoMode / (-2640000LL3600LL),// mWs_AutoMode = cellEnergy*3600,
288
289	// battery parameter
290
291	/* cef */ 99, // cef
292	/* peukert */ 105, // peukert
293	/* cellCapacity */ 100000, // cell Capacity in mAh
294	/* cellEnergy */ 2640000, // cell energy in mWh
295	/* iBatFull */ 10, // I-batt full 4% 4A bei 100Ah akku
296	/* tBatFull */ 2, // t-batt full 2 Sekunden
297	/* uBatFull */ 14000, // 14Volt Ubatt full
298	/* uBatEmpty */ 12500, // 11,312V Ubatt Empty
299	/* socCalcMode */ 1, // SoC calculation mode: 0(default)
300	/* cellRatedDischargeTime */ 2, // cell rated current discharge time [C/x]. For example, if 40Ah cell is rated as 0.5c, then rated discharge time is 2
301
302	/* lvpStart */ 12000, // uint16_t lvpStart; Spannung ab der die LOW Voltage Protection aktiv wird in mV
303	/* lvpStop */ 12500, // uint16_t lvpStop; Spannung ab der die LOW Voltage Protection wieder inaktiv wird
304	/* ovpStart */ 15000, // uint16_t ovpStart; Spannung ab der die OVER Voltage Protection aktiv wird in mV
305	/* ovpStop */ 14000, // uint16_t ovpStop; Spannung ab der die OVER Voltage Protection wieder inaktiv wird
306
307	#if (DEVICETYPE == 500)
308	/* loadCurrentLimit */ -500, // uint16_t loadCurrentLimit; maximaler Laststrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Laststrom Protection aktiv
309	/* chargeCurrentLimit */ 500, // uint16_t chargeCurrentLimit; maximaler Ladestrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Ladestrom Protection aktiv
310	#elif (DEVICETYPE == 250)
311	/* loadCurrentLimit */ -250, // uint16_t loadCurrentLimit; maximaler Laststrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Laststrom Protection aktiv
312	/* chargeCurrentLimit */ 250, // uint16_t chargeCurrentLimit maximaler Ladestrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Ladestrom Protection aktiv
313	#elif (DEVICETYPE == 125)
314	/* loadCurrentLimit */ -125, // uint16_t loadCurrentLimit; maximaler Laststrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Laststrom Protection aktiv
315	/* chargeCurrentLimit */ 125, // uint16_t chargeCurrentLimit; maximaler Ladestrom in A wenn der Strom größer ist als der eingestelle Wert dann wird die Ladestrom Protection aktiv
316	#else
317	#error No valid device type
318	#endif
319	/* chargeStopHighTemperatureStart */ 7500, // 80°C int16_t chargeStopHighTemperatureStart; Abschalttemperatur Ladung wegen zu hoher Temperatur
320	/* chargeStopHighTemperatureStop */ 7000, // 75°C int16_t chargeStopHighTemperatureStop; Wiedereinschalttemperatur
321	/* chargeStopLowTemperatureStart */ -3500, // -35°C int16_t chargeStopLowTemperatureStart; Abschalttemperatur Ladung wegen zu niedriger Temperatur
322	/* chargeStopLowTemperatureStop */ -3000, // -30°C int16_t chargeStopLowTemperatureStop; Wiedereinschalttemperatur
323	/* dischargeStopHighTemperatureStart*/ 7500, // 80°C int16_t dischargeStopHighTemperatureStart; Abschalttemperatur Entladung wegen zu hoher Temperatur
324	/* dischargeStopHighTemperatureStop */ 7000, // 75°C int16_t dischargeStopHighTemperatureStop; Wiedereinschalttemperatur
325	/* dischargeStopLowTemperatureStart */ -3500, // -35°C int16_t dischargeStopLowTemperatureStart; Abschalttemperatur EntLadung wegen zu niedriger Temperatur
326	/* dischargeStopLowTemperatureStop */ -3000, // -30°C int16_t dischargeStopLowTemperatureStop; Wiedereinschalttemperatur
327
328	/* uBatEmptyCompStartTemp */ 50, // 5°C We start calculating uBatEmpty compensations only when cell temperature is lower than this value
329	/* uBatEmptyCompStopTemp */ -200, // -20°C We stop calculating uBatEmpty compensations when cell temperature is lower than this value
330	/* uBatEmptyCompStopVolt */ 10000, // 10V uBatEmpty voltage at temperatures lower than -20°C
331
332	/* extraDischargeStrom_mA */ 7, // mA, current that LiPro consumes itself
333	/* dischargeTotalAh */ 0, // Ah for negative current counter
334	/* chargeTotalAh */ 0, // Ah for total charge counter
335	/* dischargeTotalWh */ 0,
336	/* chargeTotalWh */ 0,
337
338	/* cefW */ 90, // 90% cef for Wh calculations
339	/* onTime */ 0
340
341	};
342
343	/**
344	* @brief Gets the page of a given address
345	* @param Addr: Address of the FLASH Memory
346	* @retval The page of a given address
347	*/
348	static uint32_t GetPage(uint32_t Addr)
349	{
350	return (Addr - FLASH_BASE) / FLASH_PAGE_SIZE;
351	}
352
353	//------------------------------------------------------------------------------
354
355	static HAL_StatusTypeDef getEEPROMData(uint32_t address, uint8_t* data, uint32_t len)
356	{
357	uint8_t daten;
358
359	if ((address + len) > USER_FLASH_END) return HAL_ERROR;
360
361	for (size_t i = 0; i < len; ++i) data[i] = ((uint8_t )(address + i));
362
363	return HAL_OK;
364	}
365
366	//------------------------------------------------------------------------------
367
368	startType_t EEPROM_isFirstStart(uint8_t* fsID)
369	{
370	// sizeof eeprom_new_data_t must not be equal to size of eeprom_old_data_t
371	BUILD_BUG_ON(sizeof(eeprom_data_t) == sizeof(eeprom_old_data_t));
372
373	uint8_t firstStartCatcher;
374
375	if (getEEPROMData(EEPROM_ADRESS_FIRST_START_ID, &firstStartCatcher, 1) != HAL_OK) return FIRST_START_ERROR;
376
377	if (fsID != NULL) *fsID = firstStartCatcher;
378
379	if (firstStartCatcher == FIRST_START_ID)
380	{
381	printf ("First start detected!\n");
382	return FIRST_START_AFTER_ERASE;
383	}
384	else if (firstStartCatcher == CONFIG_ID)
385	{
386	printf ("Normal start without EEPROM changes detected\n");
387	return FIRST_START_AFTER_COMPARTIBLE_UPDATE;
388	}
389	else if (firstStartCatcher == CONFIG_ID - 1)
390	{
391	printf ("EEPROM was changed! We need to preserve calibration and settings data!\n");
392	return FIRST_START_AFTER_INCOMPARTIBLE_UPDATE;
393	}
394	else return FIRST_START_ERROR;
395	}
396
397	//------------------------------------------------------------------------------
398
399	HAL_StatusTypeDef EEPROM_fullRestore(sys_data_t* data)
400	{
401	eeprom_stored_data_t* dataToStore;
402	uint32_t PageError;
403	uint32_t Address;
404	uint32_t x;
405
406	printf("EEPROM FULL RESTORE!\n");
407
408	/************** LESE_DEFAULT_WERTE **********************/
409
410	dataToStore = (eeprom_stored_data_t*) eepromData;
411
412	// Schnittstellenparameter
413	dataToStore->changedData.baudrate = defaultEepromData.baudrate;
414	dataToStore->changedData.parityMode = defaultEepromData.parityMode;
415	dataToStore->changedData.stopBits = defaultEepromData.stopBits;
416	dataToStore->changedData.slave_adress = defaultEepromData.slave_adress;
417
418	// Offset und Gain
419	dataToStore->changedData.batteryCurrentOffsetRefTemperatureShunt = defaultEepromData.batteryCurrentOffsetRefTemperatureShunt;
420	dataToStore->changedData.batteryCurrentOffsetRefTemperatureChip = defaultEepromData.batteryCurrentOffsetRefTemperatureChip;
421	dataToStore->changedData.batteryCurrentGainRefTempShunt = defaultEepromData.batteryCurrentGainRefTempShunt;
422	dataToStore->changedData.batteryCurrentGainRefTempChip = defaultEepromData.batteryCurrentGainRefTempChip;
423	dataToStore->changedData.batteryCurrentOffsetTemperatureCalibrationTemperature = defaultEepromData.batteryCurrentOffsetTemperatureCalibrationTemperature;
424	dataToStore->changedData.batteryCurrentGainTemperatureCalibrationShuntTemperature = defaultEepromData.batteryCurrentGainTemperatureCalibrationShuntTemperature;
425	dataToStore->changedData.batteryCurrentGainTemperatureCalibrationChipTemperature = defaultEepromData.batteryCurrentGainTemperatureCalibrationChipTemperature;
426	dataToStore->changedData.batteryCurrentOffsetRefshuntVoltage = defaultEepromData.batteryCurrentOffsetRefshuntVoltage;
427	dataToStore->changedData.batteryCurrentOffsetCommonModeCalibrationVoltage = defaultEepromData.batteryCurrentOffsetCommonModeCalibrationVoltage;
428	dataToStore->changedData.batteryCurrentOffsetCommonModeCompensationFactor = defaultEepromData.batteryCurrentOffsetCommonModeCompensationFactor;
429	dataToStore->changedData.batteryCurrentOffsetTemperatureCompensationFactor = defaultEepromData.batteryCurrentOffsetTemperatureCompensationFactor;
430	dataToStore->changedData.batteryCurrentGainRefCurrent = defaultEepromData.batteryCurrentGainRefCurrent;
431	dataToStore->changedData.batteryCurrentGainTemperatureCompensationShuntFactor = defaultEepromData.batteryCurrentGainTemperatureCompensationShuntFactor;
432	dataToStore->changedData.batteryCurrentGainTemperatureCompensationChipFactor = defaultEepromData.batteryCurrentGainTemperatureCompensationChipFactor;
433
434	dataToStore->changedData.currentOffset = defaultEepromData.currentOffset;
435	dataToStore->changedData.currentGain = defaultEepromData.currentGain;
436
437	// AH Counter Parameter
438	dataToStore->changedData.cef = defaultEepromData.cef;
439	dataToStore->changedData.peukert = defaultEepromData.peukert;
440	dataToStore->changedData.cellCapacity = defaultEepromData.cellCapacity;
441	dataToStore->changedData.cellEnergy = defaultEepromData.cellEnergy;
442	dataToStore->changedData.iBatFull = defaultEepromData.iBatFull;
443	dataToStore->changedData.tBatFull = defaultEepromData.tBatFull;
444	dataToStore->changedData.uBatFull = defaultEepromData.uBatFull;
445	dataToStore->changedData.uBatEmpty = defaultEepromData.uBatEmpty;
446	dataToStore->changedData.socCalcMode = defaultEepromData.socCalcMode;
447	dataToStore->changedData.cellRatedDischargeTime = defaultEepromData.cellRatedDischargeTime;
448
449	// Schaltausgänge
450	dataToStore->changedData.lvpStart = defaultEepromData.lvpStart;
451	dataToStore->changedData.lvpStop = defaultEepromData.lvpStop;
452	dataToStore->changedData.ovpStart = defaultEepromData.ovpStart;
453	dataToStore->changedData.ovpStop = defaultEepromData.ovpStop;
454	dataToStore->changedData.loadCurrentLimit = defaultEepromData.loadCurrentLimit;
455	dataToStore->changedData.chargeCurrentLimit = defaultEepromData.chargeCurrentLimit;
456	dataToStore->changedData.chargeStopHighTemperatureStart = defaultEepromData.chargeStopHighTemperatureStart;
457	dataToStore->changedData.chargeStopHighTemperatureStop = defaultEepromData.chargeStopHighTemperatureStop;
458	dataToStore->changedData.chargeStopLowTemperatureStart = defaultEepromData.chargeStopLowTemperatureStart;
459	dataToStore->changedData.chargeStopLowTemperatureStop = defaultEepromData.chargeStopLowTemperatureStop;
460	dataToStore->changedData.dischargeStopHighTemperatureStart = defaultEepromData.dischargeStopHighTemperatureStart;
461	dataToStore->changedData.dischargeStopHighTemperatureStop = defaultEepromData.dischargeStopHighTemperatureStop;
462	dataToStore->changedData.dischargeStopLowTemperatureStart = defaultEepromData.dischargeStopLowTemperatureStart;
463	dataToStore->changedData.dischargeStopLowTemperatureStop = defaultEepromData.dischargeStopLowTemperatureStop;
464
465	dataToStore->changedData.uBatEmptyCompStartTemp = defaultEepromData.uBatEmptyCompStartTemp;
466	dataToStore->changedData.uBatEmptyCompStopTemp = defaultEepromData.uBatEmptyCompStopTemp;
467	dataToStore->changedData.uBatEmptyCompStopVolt = defaultEepromData.uBatEmptyCompStopVolt;
468
469	dataToStore->changedData.extraDischargeStrom_mA = defaultEepromData.extraDischargeStrom_mA;
470	dataToStore->changedData.dischargeTotalAh = defaultEepromData.dischargeTotalAh;
471	dataToStore->changedData.chargeTotalAh = defaultEepromData.chargeTotalAh;
472	dataToStore->changedData.dischargeTotalWh = defaultEepromData.dischargeTotalWh;
473	dataToStore->changedData.chargeTotalWh = defaultEepromData.chargeTotalWh;
474	dataToStore->changedData.cefW = defaultEepromData.cefW;
475	dataToStore->changedData.onTime = defaultEepromData.onTime;
476
477	dataToStore->changedData.mAsCounter = defaultEepromData.mAsCounter;
478	dataToStore->changedData.detectedCapacity = defaultEepromData.detectedCapacity;
479	dataToStore->changedData.detectedEnergy = defaultEepromData.detectedEnergy;
480	dataToStore->changedData.mAs_AutoMode = defaultEepromData.mAs_AutoMode;
481	dataToStore->changedData.mWs_AutoMode = defaultEepromData.mWs_AutoMode;
482
483	// Eeprom Status Infos
484	dataToStore->eepromState.writeCounter++;
485	dataToStore->eepromState.structureSize = sizeof(eeprom_stored_data_t);
486	dataToStore->eepromState.revisionInfo = 0;
487	dataToStore->eepromState.firstStartId = CONFIG_ID;
488
489	/**************PAGE_LÖSCHEN******************/
490	HAL_FLASH_Unlock();
491
492	// check for PG bit set if so clear bit
493	FLASH_WaitForLastOperation(1000);
494	if(READ_BIT(FLASH->CR, FLASH_CR_PG))
495	{
496	CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
497	}
498
499	/* Fill EraseInit structure*/
500	EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES;
501	EraseInitStruct.Page = FLASH_PAGE_NB - 1; //GetPage(USER_EEPROM_BASE_ADRESS);
502	EraseInitStruct.NbPages = 1;
503
504	/* erase Sektoren daten d+rfen nicht im instuction cache liegen */
505	if (HAL_FLASHEx_Erase(&EraseInitStruct, &PageError) != HAL_OK)
506	{
507	while (1)
508	{
509	// ERROR HAL_FLASH_GetError() kann info geben
510	}
511	}
512
513	/**************IM_FLASH_SPEICHERN******************/
514
515	/* programmiere uint64_t */
516	Address = USER_EEPROM_BASE_ADRESS;
517	x = 0;
518	while (Address < (USER_EEPROM_BASE_ADRESS + SIZE_OF_DATA_TO_STORE))
519	{
520	if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, Address, eepromData[x]) == HAL_OK)
521	{
522	Address = Address + 8;
523	x ++;
524	}
525	else
526	{
527	/* Error occurred while writing data in Flash memory.
528	User can add here some code to deal with this error */
529	while (1)
530	{
531	// ERROR
532	}
533	}
534	}
535
536	/* Lock the Flash */
537	HAL_FLASH_Lock();
538
539	/************** AUSLESEN_UND_PRÜFEN ******************/
540
541	return EEPROM_readConfig(data);
542
543	// Die Geräteinformation wird nicht geändert:
544	/*
545	dataToStore->deviceInfo.SN1;
546	dataToStore->deviceInfo.SN1;
547	dataToStore->deviceInfo.SN1;
548	dataToStore->deviceInfo.deviceInfoWritten;
549	*/
550	}
551
552	HAL_StatusTypeDef EEPROM_factoryRestore(sys_data_t* data, int resetToDefault)
553	{
554	printf("EEPROM FACTORY RESTORE/UPDATE!\n");
555
556	// Reading from FLASH old calibration and parameters data
557	if (getEEPROMData(USER_EEPROM_BASE_ADRESS, (uint8_t*)eepromOldData, sizeof(eepromOldData)) != HAL_OK) return HAL_ERROR;
558	// Interpreting these data as it were in last version of the program
559	eeprom_stored_old_data_t* oldDataToStore = (eeprom_stored_old_data_t*)eepromOldData;
560	// Allocating free space for calibration and parameters data for new version of the program
561	eeprom_stored_data_t* dataToStore = (eeprom_stored_data_t*)eepromData;
562
563	//EEPROM_readConfig(data); // Restoring calibration data
564
565	// Offset und Gain
566	dataToStore->changedData.currentOffset = oldDataToStore->changedData.currentOffset;
567	dataToStore->changedData.batteryCurrentOffsetRefTemperatureShunt = oldDataToStore->changedData.batteryCurrentOffsetRefTemperatureShunt;
568	dataToStore->changedData.batteryCurrentOffsetRefTemperatureChip = oldDataToStore->changedData.batteryCurrentOffsetRefTemperatureChip;
569	dataToStore->changedData.batteryCurrentOffsetRefshuntVoltage = oldDataToStore->changedData.batteryCurrentOffsetRefshuntVoltage;
570	dataToStore->changedData.batteryCurrentOffsetCommonModeCalibrationVoltage = oldDataToStore->changedData.batteryCurrentOffsetCommonModeCalibrationVoltage;
571	dataToStore->changedData.batteryCurrentOffsetCommonModeCompensationFactor = oldDataToStore->changedData.batteryCurrentOffsetCommonModeCompensationFactor;
572	dataToStore->changedData.batteryCurrentOffsetTemperatureCalibrationTemperature = oldDataToStore->changedData.batteryCurrentOffsetTemperatureCalibrationTemperature;
573	dataToStore->changedData.batteryCurrentOffsetTemperatureCompensationFactor = oldDataToStore->changedData.batteryCurrentOffsetTemperatureCompensationFactor;
574	dataToStore->changedData.currentGain = oldDataToStore->changedData.currentGain;
575	dataToStore->changedData.batteryCurrentGainRefTempShunt = oldDataToStore->changedData.batteryCurrentGainRefTempShunt;
576	dataToStore->changedData.batteryCurrentGainRefTempChip = oldDataToStore->changedData.batteryCurrentGainRefTempChip;
577	dataToStore->changedData.batteryCurrentGainRefCurrent = oldDataToStore->changedData.batteryCurrentGainRefCurrent;
578	dataToStore->changedData.batteryCurrentGainTemperatureCalibrationShuntTemperature = oldDataToStore->changedData.batteryCurrentGainTemperatureCalibrationShuntTemperature;
579	dataToStore->changedData.batteryCurrentGainTemperatureCompensationShuntFactor = oldDataToStore->changedData.batteryCurrentGainTemperatureCompensationShuntFactor;
580	dataToStore->changedData.batteryCurrentGainTemperatureCalibrationChipTemperature = oldDataToStore->changedData.batteryCurrentGainTemperatureCalibrationChipTemperature;
581	dataToStore->changedData.batteryCurrentGainTemperatureCompensationChipFactor = oldDataToStore->changedData.batteryCurrentGainTemperatureCompensationChipFactor;
582
583	// Schnittstellenparameter
584	dataToStore->changedData.baudrate = resetToDefault == 1 ? defaultEepromData.baudrate : oldDataToStore->changedData.baudrate;
585	dataToStore->changedData.parityMode = resetToDefault == 1 ? defaultEepromData.parityMode : oldDataToStore->changedData.parityMode;
586	dataToStore->changedData.stopBits = resetToDefault == 1 ? defaultEepromData.stopBits : oldDataToStore->changedData.stopBits;
587	dataToStore->changedData.slave_adress = resetToDefault == 1 ? defaultEepromData.slave_adress : oldDataToStore->changedData.slave_adress;
588	dataToStore->changedData.ibn_day = resetToDefault == 1 ? defaultEepromData.ibn_day : oldDataToStore->changedData.ibn_day;
589	dataToStore->changedData.ibn_month = resetToDefault == 1 ? defaultEepromData.ibn_month : oldDataToStore->changedData.ibn_month;
590	dataToStore->changedData.ibn_year = resetToDefault == 1 ? defaultEepromData.ibn_year : oldDataToStore->changedData.ibn_year;
591	dataToStore->changedData.user_id = resetToDefault == 1 ? defaultEepromData.user_id : oldDataToStore->changedData.user_id;
592
593	//Ah counter
594	dataToStore->changedData.cef = resetToDefault == 1 ? defaultEepromData.cef : oldDataToStore->changedData.cef;
595	dataToStore->changedData.cellCapacity = resetToDefault == 1 ? defaultEepromData.cellCapacity : oldDataToStore->changedData.cellCapacity;
596	dataToStore->changedData.cellEnergy = resetToDefault == 1 ? defaultEepromData.cellEnergy : oldDataToStore->changedData.cellEnergy;
597	dataToStore->changedData.iBatFull = resetToDefault == 1 ? defaultEepromData.iBatFull : oldDataToStore->changedData.iBatFull;
598	dataToStore->changedData.peukert = resetToDefault == 1 ? defaultEepromData.peukert : oldDataToStore->changedData.peukert;
599	dataToStore->changedData.tBatFull = resetToDefault == 1 ? defaultEepromData.tBatFull : oldDataToStore->changedData.tBatFull;
600	dataToStore->changedData.uBatFull = resetToDefault == 1 ? defaultEepromData.uBatFull : oldDataToStore->changedData.uBatFull;
601	dataToStore->changedData.uBatEmpty = resetToDefault == 1 ? defaultEepromData.uBatEmpty : oldDataToStore->changedData.uBatEmpty;
602	dataToStore->changedData.socCalcMode = resetToDefault == 1 ? defaultEepromData.socCalcMode : oldDataToStore->changedData.socCalcMode;
603	dataToStore->changedData.cellRatedDischargeTime = resetToDefault == 1 ? defaultEepromData.cellRatedDischargeTime : oldDataToStore->changedData.cellRatedDischargeTime;
604
605	// Schaltausgänge
606	dataToStore->changedData.lvpStart = resetToDefault == 1 ? defaultEepromData.lvpStart : oldDataToStore->changedData.lvpStart;
607	dataToStore->changedData.lvpStop = resetToDefault == 1 ? defaultEepromData.lvpStop : oldDataToStore->changedData.lvpStop;
608	dataToStore->changedData.ovpStart = resetToDefault == 1 ? defaultEepromData.ovpStart : oldDataToStore->changedData.ovpStart;
609	dataToStore->changedData.ovpStop = resetToDefault == 1 ? defaultEepromData.ovpStop : oldDataToStore->changedData.ovpStop;
610	dataToStore->changedData.loadCurrentLimit = resetToDefault == 1 ? defaultEepromData.loadCurrentLimit : oldDataToStore->changedData.loadCurrentLimit;
611	dataToStore->changedData.chargeCurrentLimit = resetToDefault == 1 ? defaultEepromData.chargeCurrentLimit : oldDataToStore->changedData.chargeCurrentLimit;
612	dataToStore->changedData.chargeStopHighTemperatureStart = resetToDefault == 1 ? defaultEepromData.chargeStopHighTemperatureStart : oldDataToStore->changedData.chargeStopHighTemperatureStart;
613	dataToStore->changedData.chargeStopHighTemperatureStop = resetToDefault == 1 ? defaultEepromData.chargeStopHighTemperatureStop : oldDataToStore->changedData.chargeStopHighTemperatureStop;
614	dataToStore->changedData.chargeStopLowTemperatureStart = resetToDefault == 1 ? defaultEepromData.chargeStopLowTemperatureStart : oldDataToStore->changedData.chargeStopHighTemperatureStop;
615	dataToStore->changedData.chargeStopLowTemperatureStop = resetToDefault == 1 ? defaultEepromData.chargeStopLowTemperatureStop : oldDataToStore->changedData.chargeStopLowTemperatureStop;
616	dataToStore->changedData.dischargeStopHighTemperatureStart = resetToDefault == 1 ? defaultEepromData.dischargeStopHighTemperatureStart : oldDataToStore->changedData.dischargeStopHighTemperatureStart;
617	dataToStore->changedData.dischargeStopHighTemperatureStop = resetToDefault == 1 ? defaultEepromData.dischargeStopHighTemperatureStop : oldDataToStore->changedData.dischargeStopHighTemperatureStop;
618	dataToStore->changedData.dischargeStopLowTemperatureStart = resetToDefault == 1 ? defaultEepromData.dischargeStopLowTemperatureStart : oldDataToStore->changedData.dischargeStopLowTemperatureStart;
619	dataToStore->changedData.dischargeStopLowTemperatureStop = resetToDefault == 1 ? defaultEepromData.dischargeStopLowTemperatureStop : oldDataToStore->changedData.dischargeStopLowTemperatureStop;
620
621	dataToStore->changedData.uBatEmptyCompStartTemp = resetToDefault == 1 ? defaultEepromData.uBatEmptyCompStartTemp : oldDataToStore->changedData.uBatEmptyCompStartTemp;
622	dataToStore->changedData.uBatEmptyCompStopTemp = resetToDefault == 1 ? defaultEepromData.uBatEmptyCompStopTemp : oldDataToStore->changedData.uBatEmptyCompStopTemp;
623	dataToStore->changedData.uBatEmptyCompStopVolt = resetToDefault == 1 ? defaultEepromData.uBatEmptyCompStopVolt : oldDataToStore->changedData.uBatEmptyCompStopVolt;
624
625	dataToStore->changedData.extraDischargeStrom_mA = resetToDefault == 1 ? defaultEepromData.extraDischargeStrom_mA : oldDataToStore->changedData.extraDischargeStrom_mA;
626	dataToStore->changedData.dischargeTotalAh = resetToDefault == 1 ? defaultEepromData.dischargeTotalAh : oldDataToStore->changedData.dischargeTotalAh;
627	dataToStore->changedData.chargeTotalAh = resetToDefault == 1 ? defaultEepromData.chargeTotalAh : oldDataToStore->changedData.chargeTotalAh;
628	dataToStore->changedData.cefW = resetToDefault == 1 ? defaultEepromData.cefW : oldDataToStore->changedData.cefW;
629	dataToStore->changedData.onTime = resetToDefault == 1 ? defaultEepromData.onTime : oldDataToStore->changedData.onTime;
630
631	// These fields are new
632	dataToStore->changedData.mAsCounter = defaultEepromData.mAsCounter;
633	dataToStore->changedData.detectedCapacity = defaultEepromData.detectedCapacity;
634	dataToStore->changedData.detectedEnergy = defaultEepromData.detectedEnergy;
635	dataToStore->changedData.mAs_AutoMode = defaultEepromData.mAs_AutoMode;
636	dataToStore->changedData.mWs_AutoMode = defaultEepromData.mWs_AutoMode;
637	dataToStore->changedData.dischargeTotalWh = defaultEepromData.dischargeTotalWh;
638	dataToStore->changedData.chargeTotalWh = defaultEepromData.chargeTotalWh;
639
640
641	dataToStore->eepromState.writeCounter = ++oldDataToStore->eepromState.writeCounter;
642	dataToStore->eepromState.structureSize = sizeof(eeprom_stored_data_t);
643	dataToStore->eepromState.revisionInfo = 0;
644	dataToStore->eepromState.firstStartId = CONFIG_ID;
645
646	dataToStore->deviceInfo.deviceInfoWritten = resetToDefault == 1 ? 0 : oldDataToStore->deviceInfo.deviceInfoWritten;
647	dataToStore->deviceInfo.SN = resetToDefault == 1 ? 0 : oldDataToStore->deviceInfo.SN;
648
649	/************** PAGE_LÖSCHEN ******************/
650	HAL_FLASH_Unlock();
651
652	// check for PG bit set if so clear bit
653	FLASH_WaitForLastOperation(1000);
654	if(READ_BIT(FLASH->CR, FLASH_CR_PG)) CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
655
656	/* Fill EraseInit structure*/
657	EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES;
658	EraseInitStruct.Page = FLASH_PAGE_NB - 1; //GetPage(USER_EEPROM_BASE_ADRESS);
659	EraseInitStruct.NbPages = 1;
660
661	/* erase Sektoren daten dürfen nicht im instruction cache liegen */
662	uint32_t PageError;
663	if (HAL_FLASHEx_Erase(&EraseInitStruct, &PageError) != HAL_OK)
664	{
665	while (1)
666	{
667	// ERROR HAL_FLASH_GetError() kann info geben
668	}
669	}
670
671	/************** IM_FLASH_SPEICHERN ******************/
672	uint32_t Address;
673	uint32_t x;
674
675	/* programmiere uint64_t */
676	Address = USER_EEPROM_BASE_ADRESS;
677	x = 0;
678	while (Address < (USER_EEPROM_BASE_ADRESS + SIZE_OF_DATA_TO_STORE))
679	{
680	if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, Address, eepromData[x]) == HAL_OK)
681	{
682	Address += 8;
683	x++;
684	}
685	else
686	{
687	/* Error occurred while writing data in Flash memory.
688	User can add here some code to deal with this error */
689	while (1)
690	{
691	// ERROR
692	}
693	}
694	}
695
696	/* Lock the Flash */
697	HAL_FLASH_Lock();
698
699	/**************AUSLESEN_UND_PRÜFEN******************/
700
701	return EEPROM_readConfig(data);
702	}
703
704	HAL_StatusTypeDef EEPROM_storeConfig(sys_data_t* data, uint8_t withSN)
705	{
706	eeprom_stored_data_t* dataToStore;
707	uint32_t PageError;
708	uint32_t Address;
709	uint32_t x;
710	/**************LESE_WERTE_AUS_SYSDATA*******************/
711	printf("EEPROM STORE CONFIG!\n");
712	dataToStore = (eeprom_stored_data_t*) eepromData;
713
714	// Schnittstellenparameter
715	dataToStore->changedData.baudrate = data->s.parameter.baudrate;
716	dataToStore->changedData.parityMode = data->s.parameter.parityMode;
717	dataToStore->changedData.stopBits = data->s.parameter.stopBit;
718	dataToStore->changedData.slave_adress = data->s.parameter.slave_address;
719	dataToStore->changedData.ibn_day = data->s.parameter.ibn_day;
720	dataToStore->changedData.ibn_month = data->s.parameter.ibn_month;
721	dataToStore->changedData.ibn_year = data->s.parameter.ibn_year;
722	dataToStore->changedData.user_id = data->s.parameter.user_id;
723
724	// Offset und Gain
725	dataToStore->changedData.batteryCurrentOffsetRefTemperatureChip = data->s.parameter.batteryCurrentOffsetRefTemperatureChip;
726	dataToStore->changedData.batteryCurrentOffsetRefTemperatureShunt = data->s.parameter.batteryCurrentOffsetRefTemperatureShunt;
727
728	dataToStore->changedData.batteryCurrentGainRefTempShunt = data->s.parameter.batteryCurrentGainRefTempShunt;
729	dataToStore->changedData.batteryCurrentGainRefTempChip = data->s.parameter.batteryCurrentGainRefTempChip;
730	dataToStore->changedData.batteryCurrentOffsetTemperatureCalibrationTemperature = data->s.parameter.batteryCurrentOffsetTemperatureCalibrationTemperature;
731	dataToStore->changedData.batteryCurrentGainTemperatureCalibrationShuntTemperature = data->s.parameter.batteryCurrentGainTemperatureCalibrationShuntTemperature;
732	dataToStore->changedData.batteryCurrentGainTemperatureCalibrationChipTemperature = data->s.parameter.batteryCurrentGainTemperatureCalibrationChipTemperature;
733	dataToStore->changedData.batteryCurrentOffsetRefshuntVoltage = data->s.parameter.batteryCurrentOffsetRefshuntVoltage;
734
735	dataToStore->changedData.batteryCurrentOffsetCommonModeCalibrationVoltage = data->s.parameter.batteryCurrentOffsetCommonModeCalibrationVoltage;
736	dataToStore->changedData.batteryCurrentOffsetCommonModeCompensationFactor = data->s.parameter.batteryCurrentOffsetCommonModeCompensationFactor;
737	dataToStore->changedData.batteryCurrentOffsetTemperatureCompensationFactor = data->s.parameter.batteryCurrentOffsetTemperatureCompensationFactor;
738	dataToStore->changedData.batteryCurrentGainRefCurrent = data->s.parameter.batteryCurrentGainRefCurrent;
739	dataToStore->changedData.batteryCurrentGainTemperatureCompensationShuntFactor = data->s.parameter.batteryCurrentGainTemperatureCompensationShuntFactor;
740	dataToStore->changedData.batteryCurrentGainTemperatureCompensationChipFactor = data->s.parameter.batteryCurrentGainTemperatureCompensationChipFactor;
741
742	dataToStore->changedData.currentOffset = data->s.parameter.batteryCurrentOffset;
743	dataToStore->changedData.currentGain = data->s.parameter.batteryCurrentGainCorrectionFaktor;
744
745	// AH COUNTER Einstellungen
746	dataToStore->changedData.cef = data->s.parameter.cef;
747	dataToStore->changedData.peukert = data->s.parameter.peukert;
748	dataToStore->changedData.cellCapacity = data->s.parameter.cellCapacity;
749	dataToStore->changedData.cellEnergy = data->s.parameter.battEnergy;
750	dataToStore->changedData.iBatFull = data->s.parameter.iBatFull;
751	dataToStore->changedData.tBatFull = data->s.parameter.tBatFull;
752	dataToStore->changedData.uBatFull = data->s.parameter.uBatFull;
753	dataToStore->changedData.uBatEmpty = data->s.parameter.uBatEmpty;
754	dataToStore->changedData.socCalcMode = data->s.parameter.socCalcMode;
755
756	dataToStore->changedData.cellRatedDischargeTime = data->s.parameter.cellRatedDischargeTime;
757	// Schaltausgänge
758	dataToStore->changedData.lvpStart = data->s.parameter.lvpStart;
759	dataToStore->changedData.lvpStop = data->s.parameter.lvpStop;
760	dataToStore->changedData.ovpStart = data->s.parameter.ovpStart;
761	dataToStore->changedData.ovpStop = data->s.parameter.ovpStop;
762	dataToStore->changedData.loadCurrentLimit = data->s.parameter.loadCurrentLimit;
763	dataToStore->changedData.chargeCurrentLimit = data->s.parameter.chargeCurrentLimit;
764	dataToStore->changedData.chargeStopHighTemperatureStart = data->s.parameter.chargeStopHighTemperatureStart;
765	dataToStore->changedData.chargeStopHighTemperatureStop = data->s.parameter.chargeStopHighTemperatureStop;
766	dataToStore->changedData.chargeStopLowTemperatureStart = data->s.parameter.chargeStopLowTemperatureStart;
767	dataToStore->changedData.chargeStopLowTemperatureStop = data->s.parameter.chargeStopLowTemperatureStop;
768	dataToStore->changedData.dischargeStopHighTemperatureStart = data->s.parameter.dischargeStopHighTemperatureStart;
769	dataToStore->changedData.dischargeStopHighTemperatureStop = data->s.parameter.dischargeStopHighTemperatureStop;
770	dataToStore->changedData.dischargeStopLowTemperatureStart = data->s.parameter.dischargeStopLowTemperatureStart;
771	dataToStore->changedData.dischargeStopLowTemperatureStop = data->s.parameter.dischargeStopLowTemperatureStop;
772
773	// Neue Parameter für SOC
774	dataToStore->changedData.uBatEmptyCompStartTemp = data->s.parameter.uBatEmptyCompStartTemp;
775	dataToStore->changedData.uBatEmptyCompStopTemp = data->s.parameter.uBatEmptyCompStopTemp;
776	dataToStore->changedData.uBatEmptyCompStopVolt = data->s.parameter.uBatEmptyCompStopVolt;
777
778	dataToStore->changedData.extraDischargeStrom_mA = data->s.parameter.extraDischargeStrom_mA;
779	dataToStore->changedData.dischargeTotalAh = data->s.values.dischargeTotalAh;
780	dataToStore->changedData.chargeTotalAh = data->s.values.chargeTotalAh;
781	dataToStore->changedData.dischargeTotalWh = data->s.values.dischargeTotalWh;
782	dataToStore->changedData.chargeTotalWh = data->s.values.chargeTotalWh;
783	dataToStore->changedData.cefW = data->s.parameter.cefW;
784	dataToStore->changedData.onTime = data->s.values.onTime;
785
786	dataToStore->changedData.mAsCounter = data->s.values.mAsCounter;
787	dataToStore->changedData.detectedCapacity = data->s.values.detectedCapacity;
788	dataToStore->changedData.detectedEnergy = data->s.values.detectedEnergy;
789	dataToStore->changedData.mAs_AutoMode = data->s.values.mAs_AutoMode;
790	dataToStore->changedData.mWs_AutoMode = data->s.values.mWs_AutoMode;
791
792	// Eeprom Status Infos
793	dataToStore->eepromState.writeCounter++;
794	dataToStore->eepromState.structureSize = sizeof(eeprom_stored_data_t);
795	dataToStore->eepromState.revisionInfo = 0;
796	dataToStore->eepromState.firstStartId = CONFIG_ID;
797
798	if (withSN)
799	{
800	printf("Writing SN!\n");
801	dataToStore->deviceInfo.SN = data->s.parameter.sn;
802	}
803
804	/**************PAGE_LÖSCHEN******************/
805	HAL_FLASH_Unlock();
806
807	// check for PG bit set if so clear bit
808	FLASH_WaitForLastOperation(1000);
809	if(READ_BIT(FLASH->CR, FLASH_CR_PG))
810	{
811	CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
812	}
813
814	/* Fill EraseInit structure*/
815	EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES;
816	EraseInitStruct.Page = FLASH_PAGE_NB - 1; //GetPage(USER_EEPROM_BASE_ADRESS);
817	EraseInitStruct.NbPages = 1;
818
819	/* erase Sektoren daten dürfen nicht im instuction cache liegen */
820	if (HAL_FLASHEx_Erase(&EraseInitStruct, &PageError) != HAL_OK)
821	{
822	while (1)
823	{
824	// ERROR HAL_FLASH_GetError() kann info geben
825	}
826	}
827
828	/**************IM_FLASH_SPEICHERN******************/
829
830	/* programmiere uint64_t */
831	Address = USER_EEPROM_BASE_ADRESS;
832	x = 0;
833	while (Address < (USER_EEPROM_BASE_ADRESS + SIZE_OF_DATA_TO_STORE))
834	{
835	if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, Address, eepromData[x]) == HAL_OK)
836	{
837	Address += 8;
838	x++;
839	}
840	else
841	{
842	/* Error occurred while writing data in Flash memory.
843	User can add here some code to deal with this error */
844	while (1)
845	{
846	// ERROR
847	}
848	}
849	}
850
851	/* Lock the Flash */
852	HAL_FLASH_Lock();
853
854	/**************AUSLESEN_UND_PRÜFEN******************/
855
856	return EEPROM_readConfig(data);
857	}
858
859	//------------------------------------------------------------------------------
860
861	HAL_StatusTypeDef EEPROM_readConfig(sys_data_t* data)
862	{
863	eeprom_stored_data_t* dataToStore;
864
865	/**************WERTE_AUS_FLASH_LESEN******************/
866
867	if (getEEPROMData(USER_EEPROM_BASE_ADRESS, (uint8_t*)eepromData, sizeof(eepromData)) != HAL_OK) return HAL_ERROR;
868
869	dataToStore = (eeprom_stored_data_t*)eepromData;
870
871	// Schnittstellenparameter
872	data->s.parameter.baudrate = dataToStore->changedData.baudrate;
873	data->s.parameter.parityMode = dataToStore->changedData.parityMode;
874	data->s.parameter.stopBit = dataToStore->changedData.stopBits;
875	data->s.parameter.slave_address = dataToStore->changedData.slave_adress;
876	data->s.parameter.ibn_day = dataToStore->changedData.ibn_day;
877	data->s.parameter.ibn_month = dataToStore->changedData.ibn_month;
878	data->s.parameter.ibn_year = dataToStore->changedData.ibn_year;
879	data->s.parameter.user_id = dataToStore->changedData.user_id;
880
881	// Offset und Gain
882	data->s.parameter.batteryCurrentOffsetRefTemperatureShunt = dataToStore->changedData.batteryCurrentOffsetRefTemperatureShunt;
883	data->s.parameter.batteryCurrentOffsetRefTemperatureChip = dataToStore->changedData.batteryCurrentOffsetRefTemperatureChip;
884	data->s.parameter.batteryCurrentGainRefTempShunt = dataToStore->changedData.batteryCurrentGainRefTempShunt;
885	data->s.parameter.batteryCurrentGainRefTempChip = dataToStore->changedData.batteryCurrentGainRefTempChip;
886	data->s.parameter.batteryCurrentOffsetTemperatureCalibrationTemperature = dataToStore->changedData.batteryCurrentOffsetTemperatureCalibrationTemperature;
887	data->s.parameter.batteryCurrentGainTemperatureCalibrationShuntTemperature = dataToStore->changedData.batteryCurrentGainTemperatureCalibrationShuntTemperature;
888	data->s.parameter.batteryCurrentGainTemperatureCalibrationChipTemperature = dataToStore->changedData.batteryCurrentGainTemperatureCalibrationChipTemperature;
889	data->s.parameter.batteryCurrentOffsetRefshuntVoltage = dataToStore ->changedData.batteryCurrentOffsetRefshuntVoltage;
890	data->s.parameter.batteryCurrentOffsetCommonModeCalibrationVoltage = dataToStore->changedData.batteryCurrentOffsetCommonModeCalibrationVoltage;
891	data->s.parameter.batteryCurrentOffsetCommonModeCompensationFactor = dataToStore->changedData.batteryCurrentOffsetCommonModeCompensationFactor;
892	data->s.parameter.batteryCurrentOffsetTemperatureCompensationFactor = dataToStore->changedData.batteryCurrentOffsetTemperatureCompensationFactor;
893	data->s.parameter.batteryCurrentGainRefCurrent = dataToStore->changedData.batteryCurrentGainRefCurrent;
894	data->s.parameter.batteryCurrentGainTemperatureCompensationShuntFactor = dataToStore->changedData.batteryCurrentGainTemperatureCompensationShuntFactor;
895	data->s.parameter.batteryCurrentGainTemperatureCompensationChipFactor = dataToStore->changedData.batteryCurrentGainTemperatureCompensationChipFactor;
896	data->s.parameter.batteryCurrentOffset = dataToStore->changedData.currentOffset;
897	data->s.parameter.batteryCurrentGainCorrectionFaktor = dataToStore->changedData.currentGain;
898
899	//Einstellungenm für AH counter
900	data->s.parameter.cef = dataToStore ->changedData.cef;
901	data->s.parameter.peukert = dataToStore ->changedData.peukert;
902	data->s.parameter.cellCapacity = dataToStore ->changedData.cellCapacity;
903	data->s.parameter.battEnergy = dataToStore ->changedData.cellEnergy;
904	data->s.parameter.iBatFull = dataToStore ->changedData.iBatFull;
905	data->s.parameter.tBatFull = dataToStore->changedData.tBatFull;
906	data->s.parameter.uBatFull = dataToStore->changedData.uBatFull;
907	data->s.parameter.uBatEmpty = dataToStore->changedData.uBatEmpty;
908	data->s.parameter.socCalcMode = dataToStore->changedData.socCalcMode;
909	data->s.parameter.cellRatedDischargeTime = dataToStore->changedData.cellRatedDischargeTime;
910
911	// New EU directive says that cell Energy in Wh must be somwhere on the
912	// visible part of the cell as well as capacity in Ah
913
914
915	// Schaltausgänge
916	data->s.parameter.lvpStart = dataToStore->changedData.lvpStart;
917	data->s.parameter.lvpStop = dataToStore->changedData.lvpStop;
918	data->s.parameter.ovpStart = dataToStore->changedData.ovpStart;
919	data->s.parameter.ovpStop = dataToStore->changedData.ovpStop;
920	data->s.parameter.loadCurrentLimit = dataToStore->changedData.loadCurrentLimit;
921	data->s.parameter.chargeCurrentLimit = dataToStore->changedData.chargeCurrentLimit;
922	data->s.parameter.chargeStopHighTemperatureStart = dataToStore->changedData.chargeStopHighTemperatureStart;
923	data->s.parameter.chargeStopHighTemperatureStop = dataToStore->changedData.chargeStopHighTemperatureStop;
924	data->s.parameter.chargeStopLowTemperatureStart = dataToStore->changedData.chargeStopLowTemperatureStart;
925	data->s.parameter.chargeStopLowTemperatureStop = dataToStore->changedData.chargeStopLowTemperatureStop;
926	data->s.parameter.dischargeStopHighTemperatureStart = dataToStore->changedData.dischargeStopHighTemperatureStart;
927	data->s.parameter.dischargeStopHighTemperatureStop = dataToStore->changedData.dischargeStopHighTemperatureStop;
928	data->s.parameter.dischargeStopLowTemperatureStart = dataToStore->changedData.dischargeStopLowTemperatureStart;
929	data->s.parameter.dischargeStopLowTemperatureStop = dataToStore->changedData.dischargeStopLowTemperatureStop;
930
931	data->s.parameter.uBatEmptyCompStartTemp = dataToStore->changedData.uBatEmptyCompStartTemp;
932	data->s.parameter.uBatEmptyCompStopTemp = dataToStore->changedData.uBatEmptyCompStopTemp;
933	data->s.parameter.uBatEmptyCompStopVolt = dataToStore->changedData.uBatEmptyCompStopVolt;
934
935	data->s.parameter.extraDischargeStrom_mA = dataToStore->changedData.extraDischargeStrom_mA;
936	data->s.values.dischargeTotalAh = dataToStore->changedData.dischargeTotalAh;
937	data->s.values.chargeTotalAh = dataToStore->changedData.chargeTotalAh;
938	data->s.values.dischargeTotalWh = dataToStore->changedData.dischargeTotalWh;
939	data->s.values.chargeTotalWh = dataToStore->changedData.chargeTotalWh;
940	data->s.parameter.cefW = dataToStore ->changedData.cefW;
941	data->s.values.onTime = dataToStore->changedData.onTime;
942
943	data->s.values.mAsCounter = dataToStore->changedData.mAsCounter;
944	data->s.values.detectedCapacity = dataToStore->changedData.detectedCapacity;
945	data->s.values.detectedEnergy = dataToStore->changedData.detectedEnergy;
946	data->s.values.mAs_AutoMode = dataToStore->changedData.mAs_AutoMode;
947	data->s.values.mWs_AutoMode = dataToStore->changedData.mWs_AutoMode;
948
949	// Geräteinformation
950	data->s.parameter.sn = dataToStore->deviceInfo.SN;
951
952	// prüfe Eeprom Status Infos
953	//dataToStore->eepromState.writeCounter ++ ;
954	if (dataToStore->eepromState.structureSize != sizeof(eeprom_stored_data_t)) return HAL_ERROR;
955	if (dataToStore->eepromState.revisionInfo != 0) return HAL_ERROR;
956	if (dataToStore->eepromState.firstStartId != CONFIG_ID) return HAL_ERROR;
957
958	return HAL_OK;
959	}

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: trunk/firmware/Src/eeprom.c @ 30

Download in other formats: