| [6] | 1 | <?xml version="1.0" encoding="UTF-8"?> |
|---|
| 2 | <launchConfiguration type="com.atollic.hardwaredebug.launch.launchConfigurationType"> |
|---|
| 3 | <stringAttribute key="com.atollic.hardwaredebug.jlink_common.cpu_core" value="Cortex-M" /> |
|---|
| 4 | <stringAttribute key="com.atollic.hardwaredebug.jlink_common.device" value="STM32G070KB" /> |
|---|
| 5 | <stringAttribute key="com.atollic.hardwaredebug.jlink_common.endian" value="little" /> |
|---|
| 6 | <stringAttribute key="com.atollic.hardwaredebug.jlink_common.init_speed" value="4000" /> |
|---|
| 7 | <booleanAttribute key="com.atollic.hardwaredebug.jlink_common.scan_chain_auto" value="true" /> |
|---|
| 8 | <intAttribute key="com.atollic.hardwaredebug.jlink_common.scan_chain_irpre" value="0" /> |
|---|
| 9 | <intAttribute key="com.atollic.hardwaredebug.jlink_common.scan_chain_pos" value="0" /> |
|---|
| 10 | <stringAttribute key="com.atollic.hardwaredebug.launch.analyzeCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers
# 2=32 bit, 1=16 bit and 0=8 bit parallelism mode
monitor flash set_parallelism_mode 2

# Load the program executable
load		

# Enable Debug connection in low power modes (DBGMCU->CR)
set *0xE0042004 = (*0xE0042004) | 0x7
# Start the executable
continue" /> |
|---|
| 11 | <booleanAttribute key="com.atollic.hardwaredebug.launch.enable_swv" value="false" /> |
|---|
| 12 | <intAttribute key="com.atollic.hardwaredebug.launch.formatVersion" value="2" /> |
|---|
| 13 | <stringAttribute key="com.atollic.hardwaredebug.launch.ipAddress" value="localhost" /> |
|---|
| 14 | <stringAttribute key="com.atollic.hardwaredebug.launch.jtagDevice" value="ST-LINK" /> |
|---|
| 15 | <intAttribute key="com.atollic.hardwaredebug.launch.portNumber" value="61234" /> |
|---|
| 16 | <stringAttribute key="com.atollic.hardwaredebug.launch.remoteCommand" value="target extended-remote" /> |
|---|
| 17 | <stringAttribute key="com.atollic.hardwaredebug.launch.runCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers
# 2=32 bit, 1=16 bit and 0=8 bit parallelism mode
monitor flash set_parallelism_mode 2

# Load the program executable
load		

# Enable Debug connection in low power modes (DBGMCU->CR)
set *0xE0042004 = (*0xE0042004) | 0x7
# Set a breakpoint at main().
tbreak main

# Run to the breakpoint.
continue" /> |
|---|
| 18 | <stringAttribute key="com.atollic.hardwaredebug.launch.serverParam" value="-p 61234 -l 1 -d" /> |
|---|
| 19 | <booleanAttribute key="com.atollic.hardwaredebug.launch.startServer" value="true" /> |
|---|
| 20 | <booleanAttribute key="com.atollic.hardwaredebug.launch.swd_mode" value="true" /> |
|---|
| 21 | <stringAttribute key="com.atollic.hardwaredebug.launch.swv_port" value="61235" /> |
|---|
| 22 | <stringAttribute key="com.atollic.hardwaredebug.launch.swv_trace_div" value="120" /> |
|---|
| 23 | <stringAttribute key="com.atollic.hardwaredebug.launch.swv_trace_hclk" value="120000000" /> |
|---|
| 24 | <booleanAttribute key="com.atollic.hardwaredebug.launch.swv_wait_for_sync" value="true" /> |
|---|
| 25 | <booleanAttribute key="com.atollic.hardwaredebug.launch.useRemoteTarget" value="true" /> |
|---|
| 26 | <stringAttribute key="com.atollic.hardwaredebug.launch.verifyCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers
# 2=32 bit, 1=16 bit and 0=8 bit parallelism mode
monitor flash set_parallelism_mode 2

# Load the program executable
load		

# Enable Debug connection in low power modes (DBGMCU->CR)
set *0xE0042004 = (*0xE0042004) | 0x7
# The executable starts automatically" /> |
|---|
| 27 | <booleanAttribute key="com.atollic.hardwaredebug.stlink.enable_logging" value="false" /> |
|---|
| 28 | <stringAttribute key="com.atollic.hardwaredebug.stlink.log_file" value="D:/projekte/ecs_i_sensor/branches/i_sensor_500a_b_hp/firmware/\Debug\st-link_gdbserver_log.txt" /> |
|---|
| 29 | <booleanAttribute key="com.atollic.hardwaredebug.stlink.verify_flash" value="false" /> |
|---|
| 30 | <stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-atollic-eabi-gdb" /> |
|---|
| 31 | <stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard (Windows)" /> |
|---|
| 32 | <stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi" /> |
|---|
| 33 | <booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false" /> |
|---|
| 34 | <stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-atollic-eabi-gdb" /> |
|---|
| 35 | <intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2" /> |
|---|
| 36 | <stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/firmware.elf" /> |
|---|
| 37 | <stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="firmware" /> |
|---|
| 38 | <stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="" /> |
|---|
| 39 | <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> |
|---|
| 40 | <listEntry value="/firmware" /> |
|---|
| 41 | </listAttribute> |
|---|
| 42 | <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> |
|---|
| 43 | <listEntry value="4" /> |
|---|
| 44 | </listAttribute> |
|---|
| 45 | <stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<memoryBlockExpressionList context="reserved-for-future-use"/>
" /> |
|---|
| 46 | </launchConfiguration> |
|---|
