source: trunk/firmware/startup/startup_stm32g070xx.s @ 6

Last change on this file since 6 was 6, checked in by f.jahn, 3 months ago
File size: 9.2 KB
RevLine 
[6]1/**
2  ******************************************************************************
3  * @file      startup_stm32g070xx.s
4  * @author    MCD Application Team
5  * @brief     STM32G070xx devices vector table for SW4STM32 toolchain.
6  *            This module performs:
7  *                - Set the initial SP
8  *                - Set the initial PC == Reset_Handler,
9  *                - Set the vector table entries with the exceptions ISR address
10  *                - Branches to main in the C library (which eventually
11  *                  calls main()).
12  *            After Reset the Cortex-M0+ processor is in Thread mode,
13  *            priority is Privileged, and the Stack is set to Main.
14  ******************************************************************************
15  * @attention
16  *
17  * Copyright (c) 2018 STMicroelectronics. All rights reserved.
18  *
19  * This software component is licensed by ST under BSD 3-Clause license,
20  * the "License"; You may not use this file except in compliance with the
21  * License. You may obtain a copy of the License at:
22  *                        opensource.org/licenses/BSD-3-Clause
23  *
24  ******************************************************************************
25  */
26
27  .syntax unified
28  .cpu cortex-m0
29  .fpu softvfp
30  .thumb
31
32.global g_pfnVectors
33.global Default_Handler
34
35/* start address for the initialization values of the .data section.
36defined in linker script */
37.word _sidata
38/* start address for the .data section. defined in linker script */
39.word _sdata
40/* end address for the .data section. defined in linker script */
41.word _edata
42/* start address for the .bss section. defined in linker script */
43.word _sbss
44/* end address for the .bss section. defined in linker script */
45.word _ebss
46
47  .section .text.Reset_Handler
48  .weak Reset_Handler
49  .type Reset_Handler, %function
50Reset_Handler:
51  ldr   r0, =_estack
52  mov   sp, r0          /* set stack pointer */
53
54/* Copy the data segment initializers from flash to SRAM */
55  movs r1, #0
56  b LoopCopyDataInit
57
58CopyDataInit:
59  ldr r3, =_sidata
60  ldr r3, [r3, r1]
61  str r3, [r0, r1]
62  adds r1, r1, #4
63
64LoopCopyDataInit:
65  ldr r0, =_sdata
66  ldr r3, =_edata
67  adds r2, r0, r1
68  cmp r2, r3
69  bcc CopyDataInit
70  ldr r2, =_sbss
71  b LoopFillZerobss
72/* Zero fill the bss segment. */
73FillZerobss:
74  movs r3, #0
75  str  r3, [r2]
76  adds r2, r2, #4
77
78
79LoopFillZerobss:
80  ldr r3, = _ebss
81  cmp r2, r3
82  bcc FillZerobss
83
84/* Call the clock system intitialization function.*/
85  bl  SystemInit
86/* Call static constructors */
87  bl __libc_init_array
88/* Call the application's entry point.*/
89  bl main
90
91LoopForever:
92    b LoopForever
93
94
95.size Reset_Handler, .-Reset_Handler
96
97/**
98 * @brief  This is the code that gets called when the processor receives an
99 *         unexpected interrupt.  This simply enters an infinite loop, preserving
100 *         the system state for examination by a debugger.
101 *
102 * @param  None
103 * @retval : None
104*/
105    .section .text.Default_Handler,"ax",%progbits
106Default_Handler:
107Infinite_Loop:
108  b Infinite_Loop
109  .size Default_Handler, .-Default_Handler
110/******************************************************************************
111*
112* The minimal vector table for a Cortex M0.  Note that the proper constructs
113* must be placed on this to ensure that it ends up at physical address
114* 0x0000.0000.
115*
116******************************************************************************/
117   .section .isr_vector,"a",%progbits
118  .type g_pfnVectors, %object
119  .size g_pfnVectors, .-g_pfnVectors
120
121
122g_pfnVectors:
123  .word  _estack
124  .word  Reset_Handler
125  .word  NMI_Handler
126  .word  HardFault_Handler
127  .word  0
128  .word  0
129  .word  0
130  .word  0
131  .word  0
132  .word  0
133  .word  0
134  .word  SVC_Handler
135  .word  0
136  .word  0
137  .word  PendSV_Handler
138  .word  SysTick_Handler
139  .word  WWDG_IRQHandler                   /* Window WatchDog              */
140  .word  0                                 /* reserved                     */
141  .word  RTC_TAMP_IRQHandler               /* RTC through the EXTI line    */
142  .word  FLASH_IRQHandler                  /* FLASH                        */
143  .word  RCC_IRQHandler                    /* RCC                          */
144  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
145  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
146  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
147  .word  0                                 /* reserved                     */
148  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
149  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
150  .word  DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler /* DMA1 Channel 4 to Channel 7, DMAMUX1 overrun */
151  .word  ADC1_IRQHandler                   /* ADC1                         */
152  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
153  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
154  .word  0                                 /* reserved                     */
155  .word  TIM3_IRQHandler                   /* TIM3                         */
156  .word  TIM6_IRQHandler                   /* TIM6                         */
157  .word  TIM7_IRQHandler                   /* TIM7                         */
158  .word  TIM14_IRQHandler                  /* TIM14                        */
159  .word  TIM15_IRQHandler                  /* TIM15                        */
160  .word  TIM16_IRQHandler                  /* TIM16                        */
161  .word  TIM17_IRQHandler                  /* TIM17                        */
162  .word  I2C1_IRQHandler                   /* I2C1                         */
163  .word  I2C2_IRQHandler                   /* I2C2                         */
164  .word  SPI1_IRQHandler                   /* SPI1                         */
165  .word  SPI2_IRQHandler                   /* SPI2                         */
166  .word  USART1_IRQHandler                 /* USART1                       */
167  .word  USART2_IRQHandler                 /* USART2                       */
168  .word  USART3_4_IRQHandler               /* USART3, USART4               */
169
170/*******************************************************************************
171*
172* Provide weak aliases for each Exception handler to the Default_Handler.
173* As they are weak aliases, any function with the same name will override
174* this definition.
175*
176*******************************************************************************/
177
178  .weak      NMI_Handler
179  .thumb_set NMI_Handler,Default_Handler
180
181  .weak      HardFault_Handler
182  .thumb_set HardFault_Handler,Default_Handler
183
184  .weak      SVC_Handler
185  .thumb_set SVC_Handler,Default_Handler
186
187  .weak      PendSV_Handler
188  .thumb_set PendSV_Handler,Default_Handler
189
190  .weak      SysTick_Handler
191  .thumb_set SysTick_Handler,Default_Handler
192
193  .weak      WWDG_IRQHandler
194  .thumb_set WWDG_IRQHandler,Default_Handler
195
196  .weak      RTC_TAMP_IRQHandler
197  .thumb_set RTC_TAMP_IRQHandler,Default_Handler
198
199  .weak      FLASH_IRQHandler
200  .thumb_set FLASH_IRQHandler,Default_Handler
201
202  .weak      RCC_IRQHandler
203  .thumb_set RCC_IRQHandler,Default_Handler
204
205  .weak      EXTI0_1_IRQHandler
206  .thumb_set EXTI0_1_IRQHandler,Default_Handler
207
208  .weak      EXTI2_3_IRQHandler
209  .thumb_set EXTI2_3_IRQHandler,Default_Handler
210
211  .weak      EXTI4_15_IRQHandler
212  .thumb_set EXTI4_15_IRQHandler,Default_Handler
213
214  .weak      DMA1_Channel1_IRQHandler
215  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
216
217  .weak      DMA1_Channel2_3_IRQHandler
218  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
219
220  .weak      DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler
221  .thumb_set DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler,Default_Handler
222
223  .weak      ADC1_IRQHandler
224  .thumb_set ADC1_IRQHandler,Default_Handler
225
226  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
227  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
228
229  .weak      TIM1_CC_IRQHandler
230  .thumb_set TIM1_CC_IRQHandler,Default_Handler
231
232  .weak      TIM3_IRQHandler
233  .thumb_set TIM3_IRQHandler,Default_Handler
234
235  .weak      TIM6_IRQHandler
236  .thumb_set TIM6_IRQHandler,Default_Handler
237
238  .weak      TIM7_IRQHandler
239  .thumb_set TIM7_IRQHandler,Default_Handler
240
241  .weak      TIM14_IRQHandler
242  .thumb_set TIM14_IRQHandler,Default_Handler
243
244  .weak      TIM15_IRQHandler
245  .thumb_set TIM15_IRQHandler,Default_Handler
246
247  .weak      TIM16_IRQHandler
248  .thumb_set TIM16_IRQHandler,Default_Handler
249
250  .weak      TIM17_IRQHandler
251  .thumb_set TIM17_IRQHandler,Default_Handler
252
253  .weak      I2C1_IRQHandler
254  .thumb_set I2C1_IRQHandler,Default_Handler
255
256  .weak      I2C2_IRQHandler
257  .thumb_set I2C2_IRQHandler,Default_Handler
258
259  .weak      SPI1_IRQHandler
260  .thumb_set SPI1_IRQHandler,Default_Handler
261
262  .weak      SPI2_IRQHandler
263  .thumb_set SPI2_IRQHandler,Default_Handler
264
265  .weak      USART1_IRQHandler
266  .thumb_set USART1_IRQHandler,Default_Handler
267
268  .weak      USART2_IRQHandler
269  .thumb_set USART2_IRQHandler,Default_Handler
270
271  .weak      USART3_4_IRQHandler
272  .thumb_set USART3_4_IRQHandler,Default_Handler
273
274/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
275
Note: See TracBrowser for help on using the repository browser.