source:
ctrl/firmware/Main/SES/Core/Inc
Name | Size | Rev | Age | Author | Last Change |
---|---|---|---|---|---|
../ | |||||
beeper_task.h | 516 bytes | 84 | 3 months | Zed | Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol. |
bme280.h | 5.8 KB | 88 | 3 months | Zed | BME280 data transfer works ok. Device returns its ID 0x60. |
bme_task.h | 194 bytes | 88 | 3 months | Zed | BME280 data transfer works ok. Device returns its ID 0x60. |
charge_controller.h | 828 bytes | 82 | 3 months | Zed | DMA transfer to µSD-card was implemented. |
common.h | 765 bytes | 83 | 3 months | Zed | Modbus Master and Slave Hardware were tested. |
eth_task.h | 209 bytes | 79 | 3 months | Zed | DHCP client can get IP-address from fritz!box |
fan_task.h | 347 bytes | 106 | 2 months | Zed | Fixing project. |
gps.h | 360 bytes | 82 | 3 months | Zed | DMA transfer to µSD-card was implemented. |
gsm_rx_thread.h | 281 bytes | 65 | 4 months | Zed | GSM, USB, BLE and GPS are working. |
gsm_thread.h | 276 bytes | 65 | 4 months | Zed | GSM, USB, BLE and GPS are working. |
gui_task.h | 260 bytes | 105 | 3 months | Zed | Fixing project. |
keys_task.h | 239 bytes | 73 | 3 months | Zed | FreeRTOS can be compiled without errors. |
main_task.h | 226 bytes | 73 | 3 months | Zed | FreeRTOS can be compiled without errors. |
mb_slave_task.h | 216 bytes | 83 | 3 months | Zed | Modbus Master and Slave Hardware were tested. |
modbus.h | 6.3 KB | 83 | 3 months | Zed | Modbus Master and Slave Hardware were tested. |
onewire_task.h | 464 bytes | 85 | 3 months | Zed | Fixing project before adding 1Wire port in CubeMX. |
st7789.h | 535 bytes | 105 | 3 months | Zed | Fixing project. |
street_light.h | 205 bytes | 82 | 3 months | Zed | DMA transfer to µSD-card was implemented. |
sysdata.h | 16.2 KB | 82 | 3 months | Zed | DMA transfer to µSD-card was implemented. |
utils.h | 597 bytes | 66 | 4 months | Zed | FAN PWM control and TACHO signal measuring are working. |
|
Note: See TracBrowser
for help on using the repository browser.