Changeset 105 for ctrl/firmware/Main/CubeMX/charger.ioc

Timestamp:

Feb 25, 2025, 11:43:07 AM (3 months ago)

Author:

Zed

Message:

Fixing project.

File:

• ctrl/firmware/Main/CubeMX/charger.ioc (modified) (4 diffs)

ctrl/firmware/Main/CubeMX/charger.ioc

@@ -553 +553 @@
 PD9.Signal=USART3_RX
 PE11.GPIOParameters=GPIO_Label
-PE11.GPIO_Label=SPI4_NSS_DISPLAY
+PE11.GPIO_Label=DISPLAY_SPI_CS
 PE11.Locked=true
 PE11.Mode=NSS_Signal_Hard_Output
 PE11.Signal=SPI4_NSS
 PE12.GPIOParameters=GPIO_Label
-PE12.GPIO_Label=SPI4_SCK_DISPLAY
+PE12.GPIO_Label=DISPLAY_SPI_SCK
 PE12.Locked=true
 PE12.Mode=Simplex_Bidirectional_Master
 PE12.Signal=SPI4_SCK
 PE13.GPIOParameters=GPIO_Label
-PE13.GPIO_Label=PWM_DISPLAY_LIGHT
+PE13.GPIO_Label=DISPLAY_BACKLIGHT_PWM
 PE13.Locked=true
-PE13.Signal=GPIO_Output
+PE13.Signal=S_TIM1_CH3
 PE14.GPIOParameters=GPIO_Label
-PE14.GPIO_Label=SPI4_MOSI_DISPLAY
+PE14.GPIO_Label=DISPLAY_SPI_MOSI
 PE14.Locked=true
 PE14.Mode=Simplex_Bidirectional_Master
@@ -789 +789 @@
 SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1 CH1N
 SH.S_TIM1_CH1.ConfNb=1
+SH.S_TIM1_CH3.0=TIM1_CH3,PWM Generation3 CH3
+SH.S_TIM1_CH3.ConfNb=1
 SH.S_TIM3_CH2.0=TIM3_CH2,PWM Generation2 CH2
 SH.S_TIM3_CH2.ConfNb=1
@@ -808 +810 @@
 SPI4.DataSize=SPI_DATASIZE_9BIT
 SPI4.Direction=SPI_DIRECTION_1LINE
-SPI4.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS,DataSize,BaudRatePrescaler
+SPI4.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS,DataSize,BaudRatePrescaler,MasterSSIdleness,MasterInterDataIdleness
+SPI4.MasterInterDataIdleness=SPI_MASTER_INTERDATA_IDLENESS_01CYCLE
+SPI4.MasterSSIdleness=SPI_MASTER_SS_IDLENESS_01CYCLE
 SPI4.Mode=SPI_MODE_MASTER
 SPI4.VirtualNSS=VM_NSSHARD
@@ -843 +847 @@
 TIM1.BreakState=TIM_BREAK_DISABLE
 TIM1.Channel-PWM\ Generation1\ CH1\ CH1N=TIM_CHANNEL_1
+TIM1.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
 TIM1.DeadTime=100
-TIM1.IPParameters=Channel-PWM Generation1 CH1 CH1N,Prescaler,Period,AutoReloadPreload,OCNPolarity_1,OCIdleState_1,Pulse-PWM Generation1 CH1 CH1N,BreakState,AutomaticOutput,OffStateRunMode,OffStateIDLEMode,LockLevel,DeadTime
+TIM1.IPParameters=Channel-PWM Generation1 CH1 CH1N,Prescaler,Period,AutoReloadPreload,OCNPolarity_1,OCIdleState_1,Pulse-PWM Generation1 CH1 CH1N,BreakState,AutomaticOutput,OffStateRunMode,OffStateIDLEMode,LockLevel,DeadTime,Channel-PWM Generation3 CH3
 TIM1.LockLevel=TIM_LOCKLEVEL_1
 TIM1.OCIdleState_1=TIM_OCIDLESTATE_SET