Changeset 75 for ctrl/firmware/Main/CubeMX/charger.ioc

Timestamp:

Jan 30, 2025, 8:24:51 AM (3 months ago)

Author:

Zed

Message:

FatFs? is working, but without DMA.

File:

• ctrl/firmware/Main/CubeMX/charger.ioc (modified) (5 diffs)

ctrl/firmware/Main/CubeMX/charger.ioc

@@ -67 +67 @@
 Dma.USART3_TX.2.SyncSignalID=NONE
 FATFS.BSP.number=1
-FATFS.IPParameters=_USE_FIND,_USE_EXPAND,_USE_LABEL,_USE_LFN,_LFN_UNICODE,_MULTI_PARTITION,_FS_EXFAT,_USE_MUTEX,_FS_REENTRANT,_FS_NORTC,_NORTC_YEAR,_NORTC_MDAY,_NORTC_MON
-FATFS._FS_EXFAT=1
-FATFS._FS_NORTC=1
-FATFS._FS_REENTRANT=0
-FATFS._LFN_UNICODE=1
+FATFS.IPParameters=_USE_FIND,_USE_EXPAND,_USE_LABEL,_USE_LFN,_LFN_UNICODE,_MULTI_PARTITION,_FS_EXFAT,_USE_MUTEX,_FS_REENTRANT,_FS_NORTC,_NORTC_YEAR,_NORTC_MDAY,_NORTC_MON,_STRF_ENCODE,_USE_STRFUNC
+FATFS._FS_EXFAT=0
+FATFS._FS_NORTC=0
+FATFS._FS_REENTRANT=1
+FATFS._LFN_UNICODE=0
 FATFS._MULTI_PARTITION=0
 FATFS._NORTC_MDAY=1
 FATFS._NORTC_MON=1
 FATFS._NORTC_YEAR=2025
+FATFS._STRF_ENCODE=0
 FATFS._USE_EXPAND=1
 FATFS._USE_FIND=1
@@ -81 +82 @@
 FATFS._USE_LFN=2
 FATFS._USE_MUTEX=1
+FATFS._USE_STRFUNC=0
 FATFS0.BSP.STBoard=false
 FATFS0.BSP.api=Unknown
@@ -95 +97 @@
 FREERTOS.INCLUDE_xTaskGetHandle=1
 FREERTOS.IPParameters=Tasks01,configENABLE_FPU,configENABLE_BACKWARD_COMPATIBILITY,configUSE_TICKLESS_IDLE,configRECORD_STACK_HIGH_ADDRESS,configCHECK_FOR_STACK_OVERFLOW,INCLUDE_xTaskGetHandle,INCLUDE_uxTaskGetStackHighWaterMark2,FootprintOK
-FREERTOS.Tasks01=mainTask,24,128,mainTaskStart,As weak,NULL,Static,mainTaskBuffer,mainTaskControlBlock
+FREERTOS.Tasks01=mainTask,24,512,mainTaskStart,As weak,NULL,Static,mainTaskBuffer,mainTaskControlBlock
 FREERTOS.configCHECK_FOR_STACK_OVERFLOW=2
 FREERTOS.configENABLE_BACKWARD_COMPATIBILITY=0
@@ -419 +421 @@
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI4_Init-SPI4-false-HAL-true,6-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_TIM3_Init-TIM3-false-HAL-true,9-MX_TIM8_Init-TIM8-false-HAL-true,10-MX_FATFS_Init-FATFS-false-HAL-false,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_MDMA_Init-MDMA-false-HAL-true,3-MX_RTC_Init-RTC-false-HAL-true,4-MX_SPI4_Init-SPI4-false-HAL-true,5-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,6-MX_USART3_UART_Init-USART3-false-HAL-true,7-MX_TIM3_Init-TIM3-false-HAL-true,8-SystemClock_Config-RCC-false-HAL-false,9-MX_FATFS_Init-FATFS-false-HAL-false,10-MX_TIM8_Init-TIM8-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
 RCC.ADCFreq_Value=166666666.66666666
 RCC.AHB12Freq_Value=100000000
@@ -501 +503 @@
 RCC.VCOInput2Freq_Value=8333333.333333333
 RCC.VCOInput3Freq_Value=1000000
+SDMMC1.ClockDiv=1
 SDMMC1.ClockPowerSave=SDMMC_CLOCK_POWER_SAVE_ENABLE
 SDMMC1.HardwareFlowControl=SDMMC_HARDWARE_FLOW_CONTROL_ENABLE
-SDMMC1.IPParameters=ClockPowerSave,HardwareFlowControl
+SDMMC1.IPParameters=ClockPowerSave,HardwareFlowControl,ClockDiv
 SH.S_TIM3_CH2.0=TIM3_CH2,PWM Generation2 CH2
 SH.S_TIM3_CH2.ConfNb=1