Changeset 89 for ctrl/firmware/Main/CubeMX/charger.ioc

Timestamp:

Feb 11, 2025, 4:29:20 PM (3 months ago)

Author:

Zed

Message:

Added basic I2C EEPROM support.

File:

• ctrl/firmware/Main/CubeMX/charger.ioc (modified) (5 diffs)

ctrl/firmware/Main/CubeMX/charger.ioc

@@ -149 +149 @@
 File.Version=6
 GPIO.groupedBy=Group By Peripherals
+I2C2.I2C_Speed_Mode=I2C_Fast_Plus
+I2C2.IPParameters=I2C_Speed_Mode,Timing
+I2C2.Timing=0x00300B29
 KeepUserPlacement=false
 MMTAppReg1.MEMORYMAP.AppRegionName=DTCMRAM
@@ -210 +213 @@
 Mcu.IP0=CORTEX_M7
 Mcu.IP1=DEBUG
-Mcu.IP10=RTC
-Mcu.IP11=SDMMC1
-Mcu.IP12=SPI2
-Mcu.IP13=SPI4
-Mcu.IP14=SYS
-Mcu.IP15=TIM3
-Mcu.IP16=TIM6
-Mcu.IP17=TIM8
-Mcu.IP18=USART2
-Mcu.IP19=USART3
+Mcu.IP10=RCC
+Mcu.IP11=RTC
+Mcu.IP12=SDMMC1
+Mcu.IP13=SPI2
+Mcu.IP14=SPI4
+Mcu.IP15=SYS
+Mcu.IP16=TIM3
+Mcu.IP17=TIM6
+Mcu.IP18=TIM8
+Mcu.IP19=USART2
 Mcu.IP2=DMA
-Mcu.IP20=USART10
+Mcu.IP20=USART3
+Mcu.IP21=USART10
 Mcu.IP3=FATFS
 Mcu.IP4=FREERTOS
 Mcu.IP5=I2C1
-Mcu.IP6=MDMA
-Mcu.IP7=MEMORYMAP
-Mcu.IP8=NVIC
-Mcu.IP9=RCC
-Mcu.IPNb=21
+Mcu.IP6=I2C2
+Mcu.IP7=MDMA
+Mcu.IP8=MEMORYMAP
+Mcu.IP9=NVIC
+Mcu.IPNb=22
 Mcu.Name=STM32H723ZETx
 Mcu.Package=LQFP144
 Mcu.Pin0=PE2
 Mcu.Pin1=PE3
-Mcu.Pin10=PE7
-Mcu.Pin11=PE11
-Mcu.Pin12=PE12
-Mcu.Pin13=PE13
-Mcu.Pin14=PE14
-Mcu.Pin15=PE15
-Mcu.Pin16=PB10
-Mcu.Pin17=PB14
-Mcu.Pin18=PB15
-Mcu.Pin19=PD8
+Mcu.Pin10=PG0
+Mcu.Pin11=PG1
+Mcu.Pin12=PE7
+Mcu.Pin13=PE11
+Mcu.Pin14=PE12
+Mcu.Pin15=PE13
+Mcu.Pin16=PE14
+Mcu.Pin17=PE15
+Mcu.Pin18=PB10
+Mcu.Pin19=PB14
 Mcu.Pin2=PE6
-Mcu.Pin20=PD9
-Mcu.Pin21=PD10
-Mcu.Pin22=PD11
-Mcu.Pin23=PD12
-Mcu.Pin24=PD13
-Mcu.Pin25=PC6
-Mcu.Pin26=PC7
-Mcu.Pin27=PC8
-Mcu.Pin28=PC9
-Mcu.Pin29=PA8
+Mcu.Pin20=PB15
+Mcu.Pin21=PD8
+Mcu.Pin22=PD9
+Mcu.Pin23=PD10
+Mcu.Pin24=PD11
+Mcu.Pin25=PD12
+Mcu.Pin26=PD13
+Mcu.Pin27=PC6
+Mcu.Pin28=PC7
+Mcu.Pin29=PC8
 Mcu.Pin3=PC14-OSC32_IN
-Mcu.Pin30=PA13(JTMS/SWDIO)
-Mcu.Pin31=PA14(JTCK/SWCLK)
-Mcu.Pin32=PA15(JTDI)
-Mcu.Pin33=PC10
-Mcu.Pin34=PC11
-Mcu.Pin35=PC12
-Mcu.Pin36=PD2
-Mcu.Pin37=PD3
-Mcu.Pin38=PD4
-Mcu.Pin39=PD5
+Mcu.Pin30=PC9
+Mcu.Pin31=PA8
+Mcu.Pin32=PA13(JTMS/SWDIO)
+Mcu.Pin33=PA14(JTCK/SWCLK)
+Mcu.Pin34=PA15(JTDI)
+Mcu.Pin35=PC10
+Mcu.Pin36=PC11
+Mcu.Pin37=PC12
+Mcu.Pin38=PD2
+Mcu.Pin39=PD3
 Mcu.Pin4=PC15-OSC32_OUT
-Mcu.Pin40=PD6
-Mcu.Pin41=PD7
-Mcu.Pin42=PG9
-Mcu.Pin43=PG10
-Mcu.Pin44=PG11
-Mcu.Pin45=PG12
-Mcu.Pin46=PG13
-Mcu.Pin47=PG14
-Mcu.Pin48=PG15
-Mcu.Pin49=PB4(NJTRST)
-Mcu.Pin5=PH0-OSC_IN
-Mcu.Pin50=PB6
-Mcu.Pin51=PB7
-Mcu.Pin52=PB8
-Mcu.Pin53=PB9
-Mcu.Pin54=VP_FATFS_VS_SDIO
-Mcu.Pin55=VP_FREERTOS_VS_CMSIS_V2
-Mcu.Pin56=VP_RTC_VS_RTC_Activate
-Mcu.Pin57=VP_RTC_VS_RTC_Calendar
-Mcu.Pin58=VP_SYS_VS_tim7
-Mcu.Pin59=VP_TIM3_VS_ClockSourceINT
-Mcu.Pin6=PH1-OSC_OUT
-Mcu.Pin60=VP_TIM6_VS_ClockSourceINT
-Mcu.Pin61=VP_TIM8_VS_ControllerModeReset
-Mcu.Pin62=VP_TIM8_VS_ClockSourceINT
-Mcu.Pin63=VP_MEMORYMAP_VS_MEMORYMAP
-Mcu.Pin7=PF15
-Mcu.Pin8=PG0
-Mcu.Pin9=PG1
-Mcu.PinsNb=64
+Mcu.Pin40=PD4
+Mcu.Pin41=PD5
+Mcu.Pin42=PD6
+Mcu.Pin43=PD7
+Mcu.Pin44=PG9
+Mcu.Pin45=PG10
+Mcu.Pin46=PG11
+Mcu.Pin47=PG12
+Mcu.Pin48=PG13
+Mcu.Pin49=PG14
+Mcu.Pin5=PF0
+Mcu.Pin50=PG15
+Mcu.Pin51=PB4(NJTRST)
+Mcu.Pin52=PB6
+Mcu.Pin53=PB7
+Mcu.Pin54=PB8
+Mcu.Pin55=PB9
+Mcu.Pin56=VP_FATFS_VS_SDIO
+Mcu.Pin57=VP_FATFS_VS_Generic
+Mcu.Pin58=VP_FREERTOS_VS_CMSIS_V2
+Mcu.Pin59=VP_RTC_VS_RTC_Activate
+Mcu.Pin6=PF1
+Mcu.Pin60=VP_RTC_VS_RTC_Calendar
+Mcu.Pin61=VP_SYS_VS_tim7
+Mcu.Pin62=VP_TIM3_VS_ClockSourceINT
+Mcu.Pin63=VP_TIM6_VS_ClockSourceINT
+Mcu.Pin64=VP_TIM8_VS_ControllerModeReset
+Mcu.Pin65=VP_TIM8_VS_ClockSourceINT
+Mcu.Pin66=VP_MEMORYMAP_VS_MEMORYMAP
+Mcu.Pin7=PH0-OSC_IN
+Mcu.Pin8=PH1-OSC_OUT
+Mcu.Pin9=PF15
+Mcu.PinsNb=67
 Mcu.ThirdParty0=STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0
 Mcu.ThirdPartyNb=1
@@ -525 +532 @@
 PE7.Locked=true
 PE7.Signal=GPIO_Output
+PF0.GPIOParameters=GPIO_Label
+PF0.GPIO_Label=EEPROM_I2C_SDA
+PF0.Locked=true
+PF0.Mode=I2C
+PF0.Signal=I2C2_SDA
+PF1.GPIOParameters=GPIO_Label
+PF1.GPIO_Label=EEPROM_I2C_SCL
+PF1.Locked=true
+PF1.Mode=I2C
+PF1.Signal=I2C2_SCL
 PF15.GPIOParameters=GPIO_Label
 PF15.GPIO_Label=POWER_4V_EN
@@ -600 +617 @@
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_MDMA_Init-MDMA-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI4_Init-SPI4-false-HAL-true,6-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_TIM3_Init-TIM3-false-HAL-true,9-SystemClock_Config-RCC-false-HAL-false,10-MX_FATFS_Init-FATFS-false-HAL-false,11-MX_TIM8_Init-TIM8-false-HAL-true,12-MX_SPI2_Init-SPI2-false-HAL-true,13-MX_USART2_UART_Init-USART2-false-HAL-true,14-MX_USART10_UART_Init-USART10-false-HAL-true,15-MX_TIM6_Init-TIM6-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_MDMA_Init-MDMA-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI4_Init-SPI4-false-HAL-true,6-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_TIM3_Init-TIM3-false-HAL-true,9-SystemClock_Config-RCC-false-HAL-false,10-MX_FATFS_Init-FATFS-false-HAL-false,11-MX_TIM8_Init-TIM8-false-HAL-true,12-MX_SPI2_Init-SPI2-false-HAL-true,13-MX_USART2_UART_Init-USART2-false-HAL-true,14-MX_USART10_UART_Init-USART10-false-HAL-true,15-MX_TIM6_Init-TIM6-false-HAL-true,16-MX_I2C1_Init-I2C1-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
 RCC.ADCFreq_Value=125000000
 RCC.AHB12Freq_Value=100000000
@@ -767 +784 @@
 USART3.SwapParam=ADVFEATURE_SWAP_ENABLE
 USART3.VirtualMode-Asynchronous=VM_ASYNC
+VP_FATFS_VS_Generic.Mode=User_defined
+VP_FATFS_VS_Generic.Signal=FATFS_VS_Generic
 VP_FATFS_VS_SDIO.Mode=SDIO
 VP_FATFS_VS_SDIO.Signal=FATFS_VS_SDIO