Changeset 91 for ctrl/firmware/Main/CubeMX

Timestamp:

Feb 13, 2025, 3:21:41 PM (3 months ago)

Author:

Zed

Message:

ADC module was activated.

Location:

ctrl/firmware/Main/CubeMX

Files:

• Core/Inc/adc.h (added)
• Core/Inc/stm32h7xx_hal_conf.h (modified) (1 diff)
• Core/Inc/stm32h7xx_it.h (modified) (1 diff)
• Core/Src/adc.c (added)
• Core/Src/dma.c (modified) (1 diff)
• Core/Src/gpio.c (modified) (1 diff)
• Core/Src/main.c (modified) (4 diffs)
• Core/Src/stm32h7xx_it.c (modified) (2 diffs)
• Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_adc.h (added)
• Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_adc_ex.h (added)
• Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_adc.c (added)
• Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_adc_ex.c (added)
• FATFS/App/fatfs.c (modified) (1 diff)
• FATFS/App/fatfs.h (modified) (1 diff)
• Middlewares/Third_Party/FatFs/src/ff.h (modified) (2 diffs)
• charger.ioc (modified) (11 diffs)

ctrl/firmware/Main/CubeMX/Core/Inc/stm32h7xx_hal_conf.h

@@ -35 +35 @@
 #define HAL_MODULE_ENABLED
 
-  /* #define HAL_ADC_MODULE_ENABLED   */
+  #define HAL_ADC_MODULE_ENABLED
 /* #define HAL_FDCAN_MODULE_ENABLED   */
 /* #define HAL_FMAC_MODULE_ENABLED   */

ctrl/firmware/Main/CubeMX/Core/Inc/stm32h7xx_it.h

@@ -58 +58 @@
 void DMA1_Stream3_IRQHandler(void);
 void DMA1_Stream4_IRQHandler(void);
+void DMA1_Stream5_IRQHandler(void);
 void EXTI9_5_IRQHandler(void);
 void TIM3_IRQHandler(void);

ctrl/firmware/Main/CubeMX/Core/Src/dma.c

@@ -59 +59 @@
   HAL_NVIC_SetPriority(DMA1_Stream4_IRQn, 5, 0);
   HAL_NVIC_EnableIRQ(DMA1_Stream4_IRQn);
+  /* DMA1_Stream5_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Stream5_IRQn, 5, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Stream5_IRQn);
 
 }

ctrl/firmware/Main/CubeMX/Core/Src/gpio.c

@@ -97 +97 @@
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  /*Configure GPIO pins : PC13 PC0 PC1 PC2
-                           PC3 PC4 PC5 */
-  GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2
-                          |GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5;
+  /*Configure GPIO pins : PC13 PC1 PC2 PC3
+                           PC4 PC5 */
+  GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5;
   GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
   GPIO_InitStruct.Pull = GPIO_NOPULL;

ctrl/firmware/Main/CubeMX/Core/Src/main.c

@@ -20 +20 @@
 #include "main.h"
 #include "cmsis_os.h"
+#include "adc.h"
 #include "dma.h"
 #include "fatfs.h"
@@ -143 +144 @@
   MX_I2C1_Init();
   MX_I2C2_Init();
+  MX_ADC1_Init();
   /* USER CODE BEGIN 2 */
 
@@ -246 +248 @@
   /** Initializes the peripherals clock
   */
-  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART10|RCC_PERIPHCLK_USART2
-                              |RCC_PERIPHCLK_USART3;
+  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_USART10
+                              |RCC_PERIPHCLK_USART2|RCC_PERIPHCLK_USART3;
   PeriphClkInitStruct.PLL3.PLL3M = 25;
-  PeriphClkInitStruct.PLL3.PLL3N = 200;
+  PeriphClkInitStruct.PLL3.PLL3N = 180;
   PeriphClkInitStruct.PLL3.PLL3P = 2;
   PeriphClkInitStruct.PLL3.PLL3Q = 8;
-  PeriphClkInitStruct.PLL3.PLL3R = 4;
+  PeriphClkInitStruct.PLL3.PLL3R = 3;
   PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_0;
   PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOMEDIUM;
@@ -258 +260 @@
   PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_PLL3;
   PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16910CLKSOURCE_PLL3;
+  PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLL3;
   if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
   {

ctrl/firmware/Main/CubeMX/Core/Src/stm32h7xx_it.c

@@ -61 +61 @@
 
 /* External variables --------------------------------------------------------*/
+extern DMA_HandleTypeDef hdma_adc1;
 extern MDMA_HandleTypeDef hmdma_mdma_channel0_sdmmc1_end_data_0;
 extern SD_HandleTypeDef hsd1;
@@ -250 +251 @@
 
 /**
+  * @brief This function handles DMA1 stream5 global interrupt.
+  */
+void DMA1_Stream5_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Stream5_IRQn 0 */
+
+  /* USER CODE END DMA1_Stream5_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_adc1);
+  /* USER CODE BEGIN DMA1_Stream5_IRQn 1 */
+
+  /* USER CODE END DMA1_Stream5_IRQn 1 */
+}
+
+/**
   * @brief This function handles EXTI line[9:5] interrupts.
   */

ctrl/firmware/Main/CubeMX/FATFS/App/fatfs.c

@@ -19 +19 @@
 #include "fatfs.h"
 
-uint8_t retSD;    /* Return value for SD */
-char SDPath[4];   /* SD logical drive path */
-FATFS SDFatFS;    /* File system object for SD logical drive */
-FIL SDFile;       /* File object for SD */
+uint8_t retSD;                                                                                                                                  /* Return value for SD */
+char SDPath[4];                                                                                                                                 /* SD logical drive path */
+FATFS SDFatFS     __attribute__((section(".AXI_RAM")));                                                 /* File system object for SD logical drive */
+FIL SDFile;                                                                                                                                             /* File object for SD */
 
 /* USER CODE BEGIN Variables */

ctrl/firmware/Main/CubeMX/FATFS/App/fatfs.h

@@ -39 +39 @@
 /* USER CODE END Includes */
 
-extern uint8_t retSD;   /* Return value for SD */
-extern char SDPath[4];  /* SD logical drive path */
-extern FATFS SDFatFS;   /* File system object for SD logical drive */
-extern FIL SDFile;              /* File object for SD */
+extern uint8_t retSD; /* Return value for SD */
+extern char SDPath[4]; /* SD logical drive path */
+extern FATFS SDFatFS; /* File system object for SD logical drive */
+extern FIL SDFile; /* File object for SD */
 
 void MX_FATFS_Init(void);

ctrl/firmware/Main/CubeMX/Middlewares/Third_Party/FatFs/src/ff.h

@@ -123 +123 @@
         DWORD   database;               /* Data base sector */
         DWORD   winsect;                /* Current sector appearing in the win[] */
-        BYTE    win[_MAX_SS];   /* Disk access window for Directory, FAT (and file data at tiny cfg) */
+        BYTE    win[_MAX_SS] __ALIGNED(32);       /* Disk access window for Directory, FAT (and file data at tiny cfg) */
 } FATFS;
 
@@ -168 +168 @@
 #endif
 #if !_FS_TINY
-        BYTE    buf[_MAX_SS];   /* File private data read/write window */
+        BYTE    buf[_MAX_SS] __ALIGNED(32);     /* File private data read/write window */
 #endif
 } FIL;

ctrl/firmware/Main/CubeMX/charger.ioc

@@ -1 +1 @@
 #MicroXplorer Configuration settings - do not modify
+ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_10
+ADC1.ClockPrescaler=ADC_CLOCK_ASYNC_DIV256
+ADC1.ContinuousConvMode=ENABLE
+ADC1.EOCSelection=ADC_EOC_SEQ_CONV
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,OffsetSignedSaturation-0\#ChannelRegularConversion,NbrOfConversionFlag,ContinuousConvMode,EOCSelection,Overrun,OversamplingMode,RightBitShift,Ratio,NbrOfConversion,ClockPrescaler
+ADC1.NbrOfConversion=1
+ADC1.NbrOfConversionFlag=1
+ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.OffsetSignedSaturation-0\#ChannelRegularConversion=DISABLE
+ADC1.Overrun=ADC_OVR_DATA_OVERWRITTEN
+ADC1.OversamplingMode=ENABLE
+ADC1.Rank-0\#ChannelRegularConversion=1
+ADC1.Ratio=1024
+ADC1.RightBitShift=ADC_RIGHTBITSHIFT_11
+ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_810CYCLES_5
+ADC1.master=1
 CAD.formats=[]
 CAD.pinconfig=Dual
@@ -13 +29 @@
 CORTEX_M7.TypeExtField_S-Cortex_Memory_Protection_Unit_Region1_Settings_S=MPU_TEX_LEVEL1
 CORTEX_M7.default_mode_Activation=1
+Dma.ADC1.5.Direction=DMA_PERIPH_TO_MEMORY
+Dma.ADC1.5.EventEnable=DISABLE
+Dma.ADC1.5.FIFOMode=DMA_FIFOMODE_DISABLE
+Dma.ADC1.5.Instance=DMA1_Stream5
+Dma.ADC1.5.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
+Dma.ADC1.5.MemInc=DMA_MINC_ENABLE
+Dma.ADC1.5.Mode=DMA_CIRCULAR
+Dma.ADC1.5.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
+Dma.ADC1.5.PeriphInc=DMA_PINC_DISABLE
+Dma.ADC1.5.Polarity=HAL_DMAMUX_REQ_GEN_RISING
+Dma.ADC1.5.Priority=DMA_PRIORITY_LOW
+Dma.ADC1.5.RequestNumber=1
+Dma.ADC1.5.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
+Dma.ADC1.5.SignalID=NONE
+Dma.ADC1.5.SyncEnable=DISABLE
+Dma.ADC1.5.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
+Dma.ADC1.5.SyncRequestNumber=1
+Dma.ADC1.5.SyncSignalID=NONE
 Dma.Request0=SPI4_TX
 Dma.Request1=USART3_RX
@@ -18 +52 @@
 Dma.Request3=SPI2_RX
 Dma.Request4=SPI2_TX
-Dma.RequestsNb=5
+Dma.Request5=ADC1
+Dma.RequestsNb=6
 Dma.SPI2_RX.3.Direction=DMA_PERIPH_TO_MEMORY
 Dma.SPI2_RX.3.EventEnable=DISABLE
@@ -212 +247 @@
 Mcu.CPN=STM32H723ZET6
 Mcu.Family=STM32H7
-Mcu.IP0=CORTEX_M7
-Mcu.IP1=DEBUG
-Mcu.IP10=RCC
-Mcu.IP11=RTC
-Mcu.IP12=SDMMC1
-Mcu.IP13=SPI2
-Mcu.IP14=SPI4
-Mcu.IP15=SYS
-Mcu.IP16=TIM3
-Mcu.IP17=TIM6
-Mcu.IP18=TIM8
-Mcu.IP19=USART2
-Mcu.IP2=DMA
-Mcu.IP20=USART3
-Mcu.IP21=USART10
-Mcu.IP3=FATFS
-Mcu.IP4=FREERTOS
-Mcu.IP5=I2C1
-Mcu.IP6=I2C2
-Mcu.IP7=MDMA
-Mcu.IP8=MEMORYMAP
-Mcu.IP9=NVIC
-Mcu.IPNb=22
+Mcu.IP0=ADC1
+Mcu.IP1=CORTEX_M7
+Mcu.IP10=NVIC
+Mcu.IP11=RCC
+Mcu.IP12=RTC
+Mcu.IP13=SDMMC1
+Mcu.IP14=SPI2
+Mcu.IP15=SPI4
+Mcu.IP16=SYS
+Mcu.IP17=TIM3
+Mcu.IP18=TIM6
+Mcu.IP19=TIM8
+Mcu.IP2=DEBUG
+Mcu.IP20=USART2
+Mcu.IP21=USART3
+Mcu.IP22=USART10
+Mcu.IP3=DMA
+Mcu.IP4=FATFS
+Mcu.IP5=FREERTOS
+Mcu.IP6=I2C1
+Mcu.IP7=I2C2
+Mcu.IP8=MDMA
+Mcu.IP9=MEMORYMAP
+Mcu.IPNb=23
 Mcu.Name=STM32H723ZETx
 Mcu.Package=LQFP144
 Mcu.Pin0=PE2
 Mcu.Pin1=PE3
-Mcu.Pin10=PG0
-Mcu.Pin11=PG1
-Mcu.Pin12=PE7
-Mcu.Pin13=PE11
-Mcu.Pin14=PE12
-Mcu.Pin15=PE13
-Mcu.Pin16=PE14
-Mcu.Pin17=PE15
-Mcu.Pin18=PB10
-Mcu.Pin19=PB14
+Mcu.Pin10=PF15
+Mcu.Pin11=PG0
+Mcu.Pin12=PG1
+Mcu.Pin13=PE7
+Mcu.Pin14=PE11
+Mcu.Pin15=PE12
+Mcu.Pin16=PE13
+Mcu.Pin17=PE14
+Mcu.Pin18=PE15
+Mcu.Pin19=PB10
 Mcu.Pin2=PE6
-Mcu.Pin20=PB15
-Mcu.Pin21=PD8
-Mcu.Pin22=PD9
-Mcu.Pin23=PD10
-Mcu.Pin24=PD11
-Mcu.Pin25=PD12
-Mcu.Pin26=PD13
-Mcu.Pin27=PC6
-Mcu.Pin28=PC7
-Mcu.Pin29=PC8
+Mcu.Pin20=PB14
+Mcu.Pin21=PB15
+Mcu.Pin22=PD8
+Mcu.Pin23=PD9
+Mcu.Pin24=PD10
+Mcu.Pin25=PD11
+Mcu.Pin26=PD12
+Mcu.Pin27=PD13
+Mcu.Pin28=PC6
+Mcu.Pin29=PC7
 Mcu.Pin3=PC14-OSC32_IN
-Mcu.Pin30=PC9
-Mcu.Pin31=PA8
-Mcu.Pin32=PA13(JTMS/SWDIO)
-Mcu.Pin33=PA14(JTCK/SWCLK)
-Mcu.Pin34=PA15(JTDI)
-Mcu.Pin35=PC10
-Mcu.Pin36=PC11
-Mcu.Pin37=PC12
-Mcu.Pin38=PD2
-Mcu.Pin39=PD3
+Mcu.Pin30=PC8
+Mcu.Pin31=PC9
+Mcu.Pin32=PA8
+Mcu.Pin33=PA13(JTMS/SWDIO)
+Mcu.Pin34=PA14(JTCK/SWCLK)
+Mcu.Pin35=PA15(JTDI)
+Mcu.Pin36=PC10
+Mcu.Pin37=PC11
+Mcu.Pin38=PC12
+Mcu.Pin39=PD2
 Mcu.Pin4=PC15-OSC32_OUT
-Mcu.Pin40=PD4
-Mcu.Pin41=PD5
-Mcu.Pin42=PD6
-Mcu.Pin43=PD7
-Mcu.Pin44=PG9
-Mcu.Pin45=PG10
-Mcu.Pin46=PG11
-Mcu.Pin47=PG12
-Mcu.Pin48=PG13
-Mcu.Pin49=PG14
+Mcu.Pin40=PD3
+Mcu.Pin41=PD4
+Mcu.Pin42=PD5
+Mcu.Pin43=PD6
+Mcu.Pin44=PD7
+Mcu.Pin45=PG9
+Mcu.Pin46=PG10
+Mcu.Pin47=PG11
+Mcu.Pin48=PG12
+Mcu.Pin49=PG13
 Mcu.Pin5=PF0
-Mcu.Pin50=PG15
-Mcu.Pin51=PB4(NJTRST)
-Mcu.Pin52=PB6
-Mcu.Pin53=PB7
-Mcu.Pin54=PB8
-Mcu.Pin55=PB9
-Mcu.Pin56=VP_FATFS_VS_SDIO
-Mcu.Pin57=VP_FREERTOS_VS_CMSIS_V2
-Mcu.Pin58=VP_RTC_VS_RTC_Activate
-Mcu.Pin59=VP_RTC_VS_RTC_Calendar
+Mcu.Pin50=PG14
+Mcu.Pin51=PG15
+Mcu.Pin52=PB4(NJTRST)
+Mcu.Pin53=PB6
+Mcu.Pin54=PB7
+Mcu.Pin55=PB8
+Mcu.Pin56=PB9
+Mcu.Pin57=VP_FATFS_VS_SDIO
+Mcu.Pin58=VP_FREERTOS_VS_CMSIS_V2
+Mcu.Pin59=VP_RTC_VS_RTC_Activate
 Mcu.Pin6=PF1
-Mcu.Pin60=VP_SYS_VS_tim7
-Mcu.Pin61=VP_TIM3_VS_ClockSourceINT
-Mcu.Pin62=VP_TIM6_VS_ClockSourceINT
-Mcu.Pin63=VP_TIM8_VS_ControllerModeReset
-Mcu.Pin64=VP_TIM8_VS_ClockSourceINT
-Mcu.Pin65=VP_MEMORYMAP_VS_MEMORYMAP
-Mcu.Pin66=VP_STMicroelectronics.X-CUBE-EEPRMA1_VS_BoardOoPartJjEEPROM_5.1.0_5.1.0
+Mcu.Pin60=VP_RTC_VS_RTC_Calendar
+Mcu.Pin61=VP_SYS_VS_tim7
+Mcu.Pin62=VP_TIM3_VS_ClockSourceINT
+Mcu.Pin63=VP_TIM6_VS_ClockSourceINT
+Mcu.Pin64=VP_TIM8_VS_ControllerModeReset
+Mcu.Pin65=VP_TIM8_VS_ClockSourceINT
+Mcu.Pin66=VP_MEMORYMAP_VS_MEMORYMAP
+Mcu.Pin67=VP_STMicroelectronics.X-CUBE-EEPRMA1_VS_BoardOoPartJjEEPROM_5.1.0_5.1.0
 Mcu.Pin7=PH0-OSC_IN
 Mcu.Pin8=PH1-OSC_OUT
-Mcu.Pin9=PF15
-Mcu.PinsNb=67
+Mcu.Pin9=PC0
+Mcu.PinsNb=68
 Mcu.ThirdParty0=STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0
 Mcu.ThirdParty1=STMicroelectronics.X-CUBE-EEPRMA1.5.1.0
@@ -345 +382 @@
 NVIC.DMA1_Stream3_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true\:true
 NVIC.DMA1_Stream4_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true\:true
+NVIC.DMA1_Stream5_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true\:true
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
 NVIC.EXTI9_5_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true\:true
@@ -426 +464 @@
 PB9.Locked=true
 PB9.Signal=GPIO_Output
+PC0.Locked=true
+PC0.Signal=ADCx_INP10
 PC10.Mode=SD_4_bits_Wide_bus
 PC10.Signal=SDMMC1_D2
@@ -619 +659 @@
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_MDMA_Init-MDMA-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI4_Init-SPI4-false-HAL-true,6-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_TIM3_Init-TIM3-false-HAL-true,9-SystemClock_Config-RCC-false-HAL-false,10-MX_FATFS_Init-FATFS-false-HAL-false,11-MX_TIM8_Init-TIM8-false-HAL-true,12-MX_SPI2_Init-SPI2-false-HAL-true,13-MX_USART2_UART_Init-USART2-false-HAL-true,14-MX_USART10_UART_Init-USART10-false-HAL-true,15-MX_TIM6_Init-TIM6-false-HAL-true,16-MX_I2C1_Init-I2C1-false-HAL-true,17-MX_I2C2_Init-I2C2-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
-RCC.ADCFreq_Value=125000000
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_MDMA_Init-MDMA-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI4_Init-SPI4-false-HAL-true,6-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_TIM3_Init-TIM3-false-HAL-true,9-SystemClock_Config-RCC-false-HAL-false,10-MX_FATFS_Init-FATFS-false-HAL-false,11-MX_TIM8_Init-TIM8-false-HAL-true,12-MX_SPI2_Init-SPI2-false-HAL-true,13-MX_USART2_UART_Init-USART2-false-HAL-true,14-MX_USART10_UART_Init-USART10-false-HAL-true,15-MX_TIM6_Init-TIM6-false-HAL-true,16-MX_I2C1_Init-I2C1-false-HAL-true,17-MX_I2C2_Init-I2C2-false-HAL-true,18-MX_ADC1_Init-ADC1-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
+RCC.ADCCLockSelection=RCC_ADCCLKSOURCE_PLL3
+RCC.ADCFreq_Value=60000000
 RCC.AHB12Freq_Value=100000000
 RCC.AHB4Freq_Value=100000000
@@ -640 +681 @@
 RCC.DIVN1=40
 RCC.DIVN2=20
-RCC.DIVN3=200
+RCC.DIVN3=180
 RCC.DIVP1Freq_Value=100000000
 RCC.DIVP2Freq_Value=125000000
-RCC.DIVP3Freq_Value=100000000
+RCC.DIVP3Freq_Value=90000000
 RCC.DIVQ1Freq_Value=100000000
 RCC.DIVQ2=11
 RCC.DIVQ2Freq_Value=22727272.727272727
 RCC.DIVQ3=8
-RCC.DIVQ3Freq_Value=25000000
+RCC.DIVQ3Freq_Value=22500000
 RCC.DIVR1Freq_Value=100000000
 RCC.DIVR2=10
 RCC.DIVR2Freq_Value=25000000
-RCC.DIVR3=4
-RCC.DIVR3Freq_Value=50000000
+RCC.DIVR3=3
+RCC.DIVR3Freq_Value=60000000
 RCC.FDCANFreq_Value=100000000
 RCC.FMCFreq_Value=100000000
@@ -662 +703 @@
 RCC.I2C123Freq_Value=64000000
 RCC.I2C4Freq_Value=100000000
-RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,I2C123CLockSelection,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL2_VCI_Range-AdvancedSettings,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123CLockSelection,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Spi45ClockSelection,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16CLockSelection,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
+RCC.IPParameters=ADCCLockSelection,ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,I2C123CLockSelection,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL2_VCI_Range-AdvancedSettings,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123CLockSelection,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Spi45ClockSelection,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16CLockSelection,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
 RCC.LPTIM1Freq_Value=100000000
 RCC.LPTIM2Freq_Value=100000000
 RCC.LPTIM345Freq_Value=100000000
 RCC.LPUART1Freq_Value=100000000
-RCC.LTDCFreq_Value=50000000
+RCC.LTDCFreq_Value=60000000
 RCC.MCO1PinFreq_Value=64000000
 RCC.MCO2PinFreq_Value=100000000
@@ -695 +736 @@
 RCC.TraceFreq_Value=100000000
 RCC.USART16CLockSelection=RCC_USART16910CLKSOURCE_PLL3
-RCC.USART16Freq_Value=25000000
+RCC.USART16Freq_Value=22500000
 RCC.USART234578CLockSelection=RCC_USART234578CLKSOURCE_PLL3
-RCC.USART234578Freq_Value=25000000
+RCC.USART234578Freq_Value=22500000
 RCC.USBFreq_Value=100000000
 RCC.VCO1OutputFreq_Value=200000000
 RCC.VCO2OutputFreq_Value=250000000
-RCC.VCO3OutputFreq_Value=200000000
+RCC.VCO3OutputFreq_Value=180000000
 RCC.VCOInput1Freq_Value=5000000
 RCC.VCOInput2Freq_Value=12500000
@@ -713 +754 @@
 SDMMC1.HardwareFlowControl=SDMMC_HARDWARE_FLOW_CONTROL_ENABLE
 SDMMC1.IPParameters=ClockPowerSave,HardwareFlowControl,ClockDiv
+SH.ADCx_INP10.0=ADC1_INP10,IN10-Single-Ended
+SH.ADCx_INP10.ConfNb=1
 SH.GPXTI8.0=GPIO_EXTI8
 SH.GPXTI8.ConfNb=1