source: ctrl/firmware/Main/CubeMX/Core/Src/gpio.c

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @113   8 weeks Zed Added CAN bus support.
(edit) @112   8 weeks Zed Fixing project. Need to add CAN in CubeMX.
(edit) @111   2 months Zed Fixing project.
(edit) @108   2 months Zed Fixing project.
(edit) @107   2 months Zed Everything works good. Fixing project.
(edit) @106   2 months Zed Fixing project.
(edit) @98   3 months Zed Charging PWM on TIM1 was implemented.
(edit) @97   3 months Zed DAC works.
(edit) @91   3 months Zed ADC module was activated.
(edit) @89   3 months Zed Added basic I2C EEPROM support.
(edit) @88   3 months Zed BME280 data transfer works ok. Device returns its ID 0x60.
(edit) @84   3 months Zed Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
(edit) @81   3 months Zed Modbus Master and Slave interfaces were added.
(edit) @77   3 months Zed LwIP was removed from the project.
(edit) @76   3 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @66   4 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @63   4 months Zed Fixing project.
(edit) @62   4 months Zed GSM STATUS pin is working.
(edit) @61   4 months Zed GSM thread was added.
(edit) @59   4 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   5 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @54   5 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @51   5 months Zed SDMMC low level driver was added.
(edit) @50   5 months Zed LED control description were added.
(edit) @48   5 months Zed Backlight was turned on for Display.
(add) @47   5 months Zed
Note: See TracRevisionLog for help on using the revision log.