source: ctrl/firmware/Main/CubeMX

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @71   5 months Zed Fixing project before adding support for FreeRTOS.
(edit) @70   5 months Zed AZRTOS and NetX were removed from the project.
(edit) @69   5 months Zed NetX can be compiled and initialized.
(edit) @68   5 months Zed Fixing project before Ethernet implementation.
(edit) @67   5 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   5 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   5 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   5 months Zed USART3 TX DMA is working.
(edit) @63   5 months Zed Fixing project.
(edit) @62   5 months Zed GSM STATUS pin is working.
(edit) @61   6 months Zed GSM thread was added.
(edit) @60   6 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   6 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   7 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   7 months Zed FileX is working.
(edit) @56   7 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   7 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   7 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   7 months Zed
(edit) @52   7 months Zed
(edit) @51   7 months Zed SDMMC low level driver was added.
(edit) @50   7 months Zed LED control description were added.
(edit) @48   7 months Zed Backlight was turned on for Display.
(edit) @47   7 months Zed
(edit) @46   7 months Zed
(edit) @45   7 months Zed Added SPI module for Display.
(edit) @44   7 months Zed
(edit) @43   7 months Zed
(edit) @42   7 months Zed
(edit) @41   7 months Zed
(edit) @40   7 months Zed
(edit) @39   7 months Zed RTC module was activated.
(edit) @38   7 months Zed Instruction and Data caches were activated.
(edit) @37   7 months Zed
(edit) @36   7 months Zed
(edit) @35   7 months Zed
(edit) @34   7 months Zed
(edit) @33   7 months Zed
(edit) @32   7 months Zed
(edit) @31   7 months Zed
(edit) @30   7 months Zed
(edit) @29   7 months Zed
(edit) @28   7 months Zed
(edit) @27   7 months Zed
(edit) @26   7 months Zed
(edit) @25   7 months Zed
(edit) @24   7 months Zed
(edit) @23   7 months Zed
(edit) @22   7 months Zed
(edit) @21   7 months Zed
(edit) @20   7 months Zed
(edit) @19   7 months Zed
(edit) @18   7 months Zed
(edit) @17   7 months Zed
(edit) @16   7 months Zed
(edit) @14   7 months Zed
(edit) @13   7 months Zed Forgot to add to the project these files.
(edit) @11   7 months Zed
(edit) @10   7 months Zed Added SEGGER project files.
(edit) @9   7 months Zed
(copy) @8   7 months Zed Rearranged several folders.
copied from ctrl/firmware/Main/Cube:
(copy) @7   7 months f.jahn
Note: See TracRevisionLog for help on using the revision log.