source: ctrl/firmware/Main/SES/Core

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @79   7 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   7 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   7 months Zed LwIP was removed from the project.
(edit) @76   8 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   8 months Zed FatFs? is working, but without DMA.
(edit) @74   8 months Zed FatFs? with DMA were implemented.
(edit) @73   8 months Zed FreeRTOS can be compiled without errors.
(edit) @69   8 months Zed NetX can be compiled and initialized.
(edit) @68   8 months Zed Fixing project before Ethernet implementation.
(edit) @67   8 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   8 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   8 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   8 months Zed USART3 TX DMA is working.
(edit) @63   8 months Zed Fixing project.
(edit) @62   8 months Zed GSM STATUS pin is working.
(edit) @61   8 months Zed GSM thread was added.
(edit) @60   8 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   8 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   9 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   9 months Zed FileX is working.
(add) @12   10 months Zed Added more files to the project.
Note: See TracRevisionLog for help on using the revision log.