source: ctrl/firmware/Main/SES/charger.emProject

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @88   3 months Zed BME280 data transfer works ok. Device returns its ID 0x60.
(edit) @87   3 months Zed RTC is working.
(edit) @84   3 months Zed Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
(edit) @83   3 months Zed Modbus Master and Slave Hardware were tested.
(edit) @82   3 months Zed DMA transfer to µSD-card was implemented.
(edit) @80   3 months Zed Added main SYS_DATA structure.
(edit) @79   3 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   3 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   3 months Zed LwIP was removed from the project.
(edit) @76   3 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   3 months Zed FatFs? is working, but without DMA.
(edit) @74   3 months Zed FatFs? with DMA were implemented.
(edit) @73   3 months Zed FreeRTOS can be compiled without errors.
(edit) @71   3 months Zed Fixing project before adding support for FreeRTOS.
(edit) @69   4 months Zed NetX can be compiled and initialized.
(edit) @68   4 months Zed Fixing project before Ethernet implementation.
(edit) @67   4 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   4 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   4 months Zed GSM, USB, BLE and GPS are working.
(edit) @63   4 months Zed Fixing project.
(edit) @61   4 months Zed GSM thread was added.
(edit) @57   5 months Zed FileX is working.
(edit) @56   5 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   5 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   5 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @51   5 months Zed SDMMC low level driver was added.
(edit) @48   5 months Zed Backlight was turned on for Display.
(edit) @47   5 months Zed
(edit) @46   5 months Zed
(edit) @45   5 months Zed Added SPI module for Display.
(edit) @44   5 months Zed
(edit) @43   5 months Zed
(edit) @42   5 months Zed
(edit) @41   5 months Zed
(edit) @37   5 months Zed
(edit) @36   5 months Zed
(edit) @35   5 months Zed
(edit) @34   5 months Zed
(edit) @33   5 months Zed
(edit) @32   5 months Zed
(edit) @31   5 months Zed
(edit) @15   5 months Zed
(edit) @13   5 months Zed Forgot to add to the project these files.
(edit) @11   6 months Zed
(add) @10   6 months Zed Added SEGGER project files.
Note: See TracRevisionLog for help on using the revision log.