source: ctrl

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @83   9 months Zed Modbus Master and Slave Hardware were tested.
(edit) @82   9 months Zed DMA transfer to µSD-card was implemented.
(edit) @81   9 months Zed Modbus Master and Slave interfaces were added.
(edit) @80   9 months Zed Added main SYS_DATA structure.
(edit) @79   9 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   9 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   9 months Zed LwIP was removed from the project.
(edit) @76   9 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   9 months Zed FatFs? is working, but without DMA.
(edit) @74   9 months Zed FatFs? with DMA were implemented.
(edit) @73   9 months Zed FreeRTOS can be compiled without errors.
(edit) @72   9 months Zed FreeRTOS was added to the project.
(edit) @71   9 months Zed Fixing project before adding support for FreeRTOS.
(edit) @70   9 months Zed AZRTOS and NetX were removed from the project.
(edit) @69   9 months Zed NetX can be compiled and initialized.
(edit) @68   9 months Zed Fixing project before Ethernet implementation.
(edit) @67   9 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   9 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   9 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   10 months Zed USART3 TX DMA is working.
(edit) @63   10 months Zed Fixing project.
(edit) @62   10 months Zed GSM STATUS pin is working.
(edit) @61   10 months Zed GSM thread was added.
(edit) @60   10 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   10 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   11 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   11 months Zed FileX is working.
(edit) @56   11 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   11 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   11 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   11 months Zed
(edit) @52   11 months Zed
(edit) @51   11 months Zed SDMMC low level driver was added.
(edit) @50   11 months Zed LED control description were added.
(edit) @49   11 months f.jahn
(edit) @48   11 months Zed Backlight was turned on for Display.
(edit) @47   11 months Zed
(edit) @46   11 months Zed
(edit) @45   11 months Zed Added SPI module for Display.
(edit) @44   11 months Zed
(edit) @43   11 months Zed
(edit) @42   11 months Zed
(edit) @41   11 months Zed
(edit) @40   11 months Zed
(edit) @39   11 months Zed RTC module was activated.
(edit) @38   11 months Zed Instruction and Data caches were activated.
(edit) @37   11 months Zed
(edit) @36   11 months Zed
(edit) @35   11 months Zed
(edit) @34   11 months Zed
(edit) @33   11 months Zed
(edit) @32   11 months Zed
(edit) @31   11 months Zed
(edit) @30   11 months Zed
(edit) @29   11 months Zed
(edit) @28   11 months Zed
(edit) @27   11 months Zed
(edit) @26   11 months Zed
(edit) @25   11 months Zed
(edit) @24   11 months Zed
(edit) @23   11 months Zed
(edit) @22   11 months Zed
(edit) @21   11 months Zed
(edit) @20   11 months Zed
(edit) @19   11 months Zed
(edit) @18   11 months Zed
(edit) @17   11 months Zed
(edit) @16   11 months Zed
(edit) @15   11 months Zed
(edit) @14   11 months Zed
(edit) @13   11 months Zed Forgot to add to the project these files.
(edit) @12   11 months Zed Added more files to the project.
(edit) @11   11 months Zed
(edit) @10   11 months Zed Added SEGGER project files.
(edit) @9   11 months Zed
(edit) @8   11 months Zed Rearranged several folders.
(edit) @7   11 months f.jahn
(edit) @6   11 months f.jahn
(edit) @4   13 months f.jahn
(add) @3   13 months f.jahn
Note: See TracRevisionLog for help on using the revision log.