Changeset 21 for trunk/firmware_v2/firmware_v2.ioc

Timestamp:

Aug 19, 2025, 1:16:30 PM (8 days ago)

Author:

f.jahn

Message:

Input Capture DMA-circular mode with automatic counter reset seems working!

File:

• trunk/firmware_v2/firmware_v2.ioc (modified) (5 diffs)

trunk/firmware_v2/firmware_v2.ioc

@@ -96 +96 @@
 Mcu.Pin27=VP_ADC1_TempSens_Input
 Mcu.Pin28=VP_SYS_VS_Systick
-Mcu.Pin29=VP_TIM3_VS_ClockSourceINT
+Mcu.Pin29=VP_TIM3_VS_ControllerModeReset
 Mcu.Pin3=PA0
-Mcu.Pin30=VP_TIM17_VS_ClockSourceINT
+Mcu.Pin30=VP_TIM3_VS_ClockSourceINT
+Mcu.Pin31=VP_TIM17_VS_ClockSourceINT
 Mcu.Pin4=PA1
 Mcu.Pin5=PA2
@@ -105 +106 @@
 Mcu.Pin8=PA5
 Mcu.Pin9=PA6
-Mcu.PinsNb=31
+Mcu.PinsNb=32
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
@@ -289 +290 @@
 SH.S_TIM17_CH1.0=TIM17_CH1,PWM Generation1 CH1
 SH.S_TIM17_CH1.ConfNb=1
-SH.S_TIM3_CH1.0=TIM3_CH1,Input_Capture1_from_TI1
-SH.S_TIM3_CH1.ConfNb=1
+SH.S_TIM3_CH1.0=TIM3_CH1,TriggerSource_TI1FP1
+SH.S_TIM3_CH1.1=TIM3_CH1,Input_Capture1_from_TI1
+SH.S_TIM3_CH1.ConfNb=2
 TIM17.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE
 TIM17.Channel=TIM_CHANNEL_1
@@ -301 +303 @@
 TIM3.ICPolarity_CH1=TIM_INPUTCHANNELPOLARITY_FALLING
 TIM3.IPParameters=Channel-Input_Capture1_from_TI1,Prescaler,AutoReloadPreload,ICPolarity_CH1
-TIM3.Prescaler=3
+TIM3.Prescaler=11
 USART1.IPParameters=VirtualMode-Asynchronous
 USART1.VirtualMode-Asynchronous=VM_ASYNC
@@ -312 +314 @@
 VP_TIM3_VS_ClockSourceINT.Mode=Internal
 VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
+VP_TIM3_VS_ControllerModeReset.Mode=Reset Mode
+VP_TIM3_VS_ControllerModeReset.Signal=TIM3_VS_ControllerModeReset
 board=custom