Changeset 23 for trunk/firmware_v2/firmware_v2.ioc

Timestamp:

Aug 21, 2025, 3:14:57 PM (6 days ago)

Author:

f.jahn

Message:

Änderung neuer Controller mit mehr Speicher

File:

• trunk/firmware_v2/firmware_v2.ioc (modified) (10 diffs)

trunk/firmware_v2/firmware_v2.ioc

@@ -37 +37 @@
 Dma.ADC1.0.SyncSignalID=NONE
 Dma.Request0=ADC1
-Dma.Request1=TIM3_CH1
-Dma.RequestsNb=2
-Dma.TIM3_CH1.1.Direction=DMA_PERIPH_TO_MEMORY
-Dma.TIM3_CH1.1.EventEnable=DISABLE
-Dma.TIM3_CH1.1.Instance=DMA1_Channel2
-Dma.TIM3_CH1.1.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
-Dma.TIM3_CH1.1.MemInc=DMA_MINC_ENABLE
-Dma.TIM3_CH1.1.Mode=DMA_CIRCULAR
-Dma.TIM3_CH1.1.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
-Dma.TIM3_CH1.1.PeriphInc=DMA_PINC_DISABLE
-Dma.TIM3_CH1.1.Polarity=HAL_DMAMUX_REQ_GEN_RISING
-Dma.TIM3_CH1.1.Priority=DMA_PRIORITY_LOW
-Dma.TIM3_CH1.1.RequestNumber=1
-Dma.TIM3_CH1.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
-Dma.TIM3_CH1.1.SignalID=NONE
-Dma.TIM3_CH1.1.SyncEnable=DISABLE
-Dma.TIM3_CH1.1.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
-Dma.TIM3_CH1.1.SyncRequestNumber=1
-Dma.TIM3_CH1.1.SyncSignalID=NONE
+Dma.RequestsNb=1
 File.Version=6
 GPIO.groupedBy=Group By Peripherals
@@ -68 +50 @@
 Mcu.IP5=RCC
 Mcu.IP6=SYS
-Mcu.IP7=TIM3
+Mcu.IP7=TIM16
 Mcu.IP8=TIM17
 Mcu.IP9=USART1
@@ -96 +78 @@
 Mcu.Pin27=VP_ADC1_TempSens_Input
 Mcu.Pin28=VP_SYS_VS_Systick
-Mcu.Pin29=VP_TIM3_VS_ControllerModeReset
+Mcu.Pin29=VP_TIM16_VS_ClockSourceINT
 Mcu.Pin3=PA0
-Mcu.Pin30=VP_TIM3_VS_ClockSourceINT
-Mcu.Pin31=VP_TIM17_VS_ClockSourceINT
+Mcu.Pin30=VP_TIM17_VS_ClockSourceINT
 Mcu.Pin4=PA1
 Mcu.Pin5=PA2
@@ -106 +87 @@
 Mcu.Pin8=PA5
 Mcu.Pin9=PA6
-Mcu.PinsNb=32
+Mcu.PinsNb=31
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
@@ -113 +94 @@
 MxDb.Version=DB.6.0.150
 NVIC.DMA1_Channel1_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
-NVIC.DMA1_Channel2_3_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
 NVIC.ForceEnableDMAVector=true
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
@@ -120 +100 @@
 NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
 NVIC.SysTick_IRQn=true\:3\:0\:false\:false\:true\:false\:true\:false
-NVIC.TIM3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.TIM16_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
 PA0.GPIOParameters=GPIO_PuPd,GPIO_Label
 PA0.GPIO_Label=GPIO_INPUT_LVP
@@ -163 +143 @@
 PA6.GPIO_PuPd=GPIO_PULLUP
 PA6.Locked=true
-PA6.Signal=S_TIM3_CH1
+PA6.Signal=S_TIM16_CH1
 PA7.GPIOParameters=GPIO_Label
 PA7.GPIO_Label=FAN_PWM
@@ -288 +268 @@
 RCC.SYSCLKFreq_VALUE=12000000
 RCC.USART1Freq_Value=12000000
+SH.S_TIM16_CH1.0=TIM16_CH1,Input_Capture1_from_TI1
+SH.S_TIM16_CH1.ConfNb=1
 SH.S_TIM17_CH1.0=TIM17_CH1,PWM Generation1 CH1
 SH.S_TIM17_CH1.ConfNb=1
-SH.S_TIM3_CH1.0=TIM3_CH1,TriggerSource_TI1FP1
-SH.S_TIM3_CH1.1=TIM3_CH1,Input_Capture1_from_TI1
-SH.S_TIM3_CH1.ConfNb=2
+TIM16.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE
+TIM16.Channel=TIM_CHANNEL_1
+TIM16.ICPolarity_CH1=TIM_INPUTCHANNELPOLARITY_FALLING
+TIM16.IPParameters=Channel,Prescaler,AutoReloadPreload,ICPolarity_CH1
+TIM16.Prescaler=23
 TIM17.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE
 TIM17.Channel=TIM_CHANNEL_1
@@ -298 +282 @@
 TIM17.OCPolarity_1=TIM_OCPOLARITY_LOW
 TIM17.Period=479
-TIM17.Pulse=64
-TIM3.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE
-TIM3.Channel-Input_Capture1_from_TI1=TIM_CHANNEL_1
-TIM3.ICPolarity_CH1=TIM_INPUTCHANNELPOLARITY_FALLING
-TIM3.IPParameters=Channel-Input_Capture1_from_TI1,Prescaler,AutoReloadPreload,ICPolarity_CH1,TIM_MasterSlaveMode
-TIM3.Prescaler=3
-TIM3.TIM_MasterSlaveMode=TIM_MASTERSLAVEMODE_ENABLE
+TIM17.Pulse=0
 USART1.IPParameters=VirtualMode-Asynchronous
 USART1.VirtualMode-Asynchronous=VM_ASYNC
@@ -311 +289 @@
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
 VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer
 VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT
-VP_TIM3_VS_ClockSourceINT.Mode=Internal
-VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
-VP_TIM3_VS_ControllerModeReset.Mode=Reset Mode
-VP_TIM3_VS_ControllerModeReset.Signal=TIM3_VS_ControllerModeReset
 board=custom