Changes in trunk/firmware/Src/adc.c [6:26]

File:

• trunk/firmware/Src/adc.c (modified) (8 diffs)

trunk/firmware/Src/adc.c

@@ -36 +36 @@
   */
   hadc1.Instance = ADC1;
-  hadc1.Init.ClockPrescaler = LL_ADC_CLOCK_SYNC_PCLK_DIV4;
+  hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
   hadc1.Init.Resolution = ADC_RESOLUTION_12B;
   hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
+  hadc1.Init.ScanConvMode = ADC_SCAN_SEQ_FIXED; //More channnels
   hadc1.Init.EOCSelection = ADC_EOC_SEQ_CONV;
   hadc1.Init.LowPowerAutoWait = DISABLE;
   hadc1.Init.LowPowerAutoPowerOff = DISABLE;
   hadc1.Init.ContinuousConvMode = ENABLE;
-  hadc1.Init.NbrOfConversion = 8;
+  hadc1.Init.NbrOfConversion = 1;
   hadc1.Init.DiscontinuousConvMode = DISABLE;
   hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
   hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
   hadc1.Init.DMAContinuousRequests = ENABLE;
-  hadc1.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN;
-  hadc1.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_160CYCLES_5;
+  hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+  hadc1.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_160CYCLES_5; //bei79,5 ist das gezappelt in der fast voltage eindeutig höher
   hadc1.Init.SamplingTimeCommon2 = ADC_SAMPLETIME_160CYCLES_5;
   hadc1.Init.OversamplingMode = ENABLE;
@@ -65 +65 @@
   //Messung Common Mode Voltage (Shunt Spannung - gegen Batterie Minus)
   sConfig.Channel = ADC_CHANNEL_0;
-  sConfig.Rank = ADC_REGULAR_RANK_1;
+  sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
   sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
@@ -75 +75 @@
   //Messung Batteriespannung Plus
   sConfig.Channel = ADC_CHANNEL_1;
-  sConfig.Rank = ADC_REGULAR_RANK_2;
-  sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
@@ -85 +83 @@
   //Messung Neu : Vref
   sConfig.Channel = ADC_CHANNEL_2;
-  sConfig.Rank = ADC_REGULAR_RANK_3;
-  sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
@@ -94 +90 @@
   //Fast current Plus
   sConfig.Channel = ADC_CHANNEL_3;
-  sConfig.Rank = ADC_REGULAR_RANK_4;
-  sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
@@ -103 +97 @@
   //Fast current Minus
   sConfig.Channel = ADC_CHANNEL_4;
-  sConfig.Rank = ADC_REGULAR_RANK_5;
-  sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;
-  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+
+  sConfig.Channel = ADC_CHANNEL_TEMPSENSOR;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
 
 
@@ -115 +115 @@
   //ovp sense
   sConfig.Channel = ADC_CHANNEL_8;
-  sConfig.Rank = ADC_REGULAR_RANK_6;
-  sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_2;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
@@ -124 +122 @@
   //lvp sense
   sConfig.Channel = ADC_CHANNEL_9;
-  sConfig.Rank = ADC_REGULAR_RANK_7;
-  sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_2;
-  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
 
   //Temp Meas
   sConfig.Channel = ADC_CHANNEL_10;
-  sConfig.Rank = ADC_REGULAR_RANK_8;
-  sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;
-  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-
-
-
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
 }