Changeset 38 for trunk/fw_g473rct/fw_g473rct.ioc

Timestamp:

Nov 1, 2025, 5:29:27 PM (37 hours ago)

Author:

f.jahn

Message:

 

File:

• trunk/fw_g473rct/fw_g473rct.ioc (modified) (10 diffs)

trunk/fw_g473rct/fw_g473rct.ioc

@@ -253 +253 @@
 I2C4.IPParameters=Timing
 I2C4.Timing=0x20B182BE
+IWDG.IPParameters=Prescaler,Window,Reload
+IWDG.Prescaler=IWDG_PRESCALER_32
+IWDG.Reload=1000
+IWDG.Window=1000
 KeepUserPlacement=false
 Mcu.CPN=STM32G473RCT6
@@ -259 +263 @@
 Mcu.IP1=ADC2
 Mcu.IP10=I2C4
-Mcu.IP11=NVIC
-Mcu.IP12=RCC
-Mcu.IP13=RTC
-Mcu.IP14=SPI3
-Mcu.IP15=SYS
-Mcu.IP16=USART1
-Mcu.IP17=USART2
-Mcu.IP18=USB
+Mcu.IP11=IWDG
+Mcu.IP12=NVIC
+Mcu.IP13=RCC
+Mcu.IP14=RTC
+Mcu.IP15=SPI3
+Mcu.IP16=SYS
+Mcu.IP17=USART1
+Mcu.IP18=USART2
+Mcu.IP19=USB
 Mcu.IP2=ADC3
 Mcu.IP3=ADC4
@@ -275 +280 @@
 Mcu.IP8=FDCAN3
 Mcu.IP9=I2C3
-Mcu.IPNb=19
+Mcu.IPNb=20
 Mcu.Name=STM32G473R(B-C-E)Tx
 Mcu.Package=LQFP64
@@ -324 +329 @@
 Mcu.Pin49=VP_CRC_VS_CRC
 Mcu.Pin5=PC0
-Mcu.Pin50=VP_RTC_VS_RTC_Activate
-Mcu.Pin51=VP_SYS_V_VREFBUF
-Mcu.Pin52=VP_SYS_VS_Systick
-Mcu.Pin53=VP_SYS_VS_DBSignals
+Mcu.Pin50=VP_IWDG_VS_IWDG
+Mcu.Pin51=VP_RTC_VS_RTC_Activate
+Mcu.Pin52=VP_SYS_V_VREFBUF
+Mcu.Pin53=VP_SYS_VS_Systick
+Mcu.Pin54=VP_SYS_VS_DBSignals
 Mcu.Pin6=PC1
 Mcu.Pin7=PA0
 Mcu.Pin8=PA1
 Mcu.Pin9=PA2
-Mcu.PinsNb=54
+Mcu.PinsNb=55
 Mcu.ThirdParty0=STMicroelectronics.X-CUBE-EEPRMA1.5.2.0
 Mcu.ThirdPartyNb=1
@@ -349 +355 @@
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.EXTI2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.EXTI9_5_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
 NVIC.ForceEnableDMAVector=true
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
@@ -453 +460 @@
 PB6.Mode=FDCAN_Activate
 PB6.Signal=FDCAN2_TX
-PB7.GPIOParameters=GPIO_PuPd,GPIO_Label
-PB7.GPIO_Label=FAULT
+PB7.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PB7.GPIO_Label=FAULT_INT
+PB7.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING
 PB7.GPIO_PuPd=GPIO_PULLUP
 PB7.Locked=true
-PB7.Signal=GPIO_Input
+PB7.Signal=GPXTI7
 PB9.GPIOParameters=GPIO_Label
 PB9.GPIO_Label=COM_POWERPRO_RES
@@ -496 +504 @@
 PC9.Mode=I2C
 PC9.Signal=I2C3_SDA
-PD2.GPIOParameters=GPIO_Label,GPIO_ModeDefaultEXTI
+PD2.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
 PD2.GPIO_Label=ADC_DATA_READY
 PD2.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING
+PD2.GPIO_PuPd=GPIO_PULLUP
 PD2.Locked=true
 PD2.Signal=GPXTI2
@@ -537 +546 @@
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_ADC2_Init-ADC2-false-HAL-true,6-MX_ADC3_Init-ADC3-false-HAL-true,7-MX_ADC4_Init-ADC4-false-HAL-true,8-MX_ADC5_Init-ADC5-false-HAL-true,9-MX_FDCAN2_Init-FDCAN2-false-HAL-true,10-MX_FDCAN3_Init-FDCAN3-false-HAL-true,11-MX_I2C3_Init-I2C3-false-HAL-true,12-MX_I2C4_Init-I2C4-false-HAL-true,13-MX_SPI3_Init-SPI3-false-HAL-true,14-MX_USART1_UART_Init-USART1-false-HAL-true,15-MX_USART2_UART_Init-USART2-false-HAL-true,16-MX_USB_PCD_Init-USB-false-HAL-true,17-MX_CRC_Init-CRC-false-HAL-true,18-MX_RTC_Init-RTC-false-HAL-true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_ADC2_Init-ADC2-false-HAL-true,6-MX_ADC3_Init-ADC3-false-HAL-true,7-MX_ADC4_Init-ADC4-false-HAL-true,8-MX_ADC5_Init-ADC5-false-HAL-true,9-MX_FDCAN2_Init-FDCAN2-false-HAL-true,10-MX_FDCAN3_Init-FDCAN3-false-HAL-true,11-MX_I2C3_Init-I2C3-false-HAL-true,12-MX_I2C4_Init-I2C4-false-HAL-true,13-MX_SPI3_Init-SPI3-false-HAL-true,14-MX_USART1_UART_Init-USART1-false-HAL-true,15-MX_USART2_UART_Init-USART2-false-HAL-true,16-MX_USB_PCD_Init-USB-false-HAL-true,17-MX_CRC_Init-CRC-false-HAL-true,18-MX_RTC_Init-RTC-false-HAL-true,19-MX_IWDG_Init-IWDG-false-HAL-true
 RCC.ADC12CLockSelection=RCC_ADC12CLKSOURCE_PLL
 RCC.ADC12Freq_Value=25000000
@@ -595 +604 @@
 SH.GPXTI2.0=GPIO_EXTI2
 SH.GPXTI2.ConfNb=1
+SH.GPXTI7.0=GPIO_EXTI7
+SH.GPXTI7.ConfNb=1
 SPI3.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_8
 SPI3.CLKPhase=SPI_PHASE_2EDGE
@@ -621 +632 @@
 VP_CRC_VS_CRC.Mode=CRC_Activate
 VP_CRC_VS_CRC.Signal=CRC_VS_CRC
+VP_IWDG_VS_IWDG.Mode=IWDG_Activate
+VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
 VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
 VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate