Changeset 79 for ctrl/firmware/Main/CubeMX/charger.ioc

Timestamp:

Feb 4, 2025, 1:58:46 PM (3 months ago)

Author:

Zed

Message:

DHCP client can get IP-address from fritz!box

File:

• ctrl/firmware/Main/CubeMX/charger.ioc (modified) (2 diffs)

ctrl/firmware/Main/CubeMX/charger.ioc

@@ -11 +11 @@
 Dma.Request1=USART3_RX
 Dma.Request2=USART3_TX
-Dma.RequestsNb=3
+Dma.Request3=SPI2_RX
+Dma.Request4=SPI2_TX
+Dma.RequestsNb=5
+Dma.SPI2_RX.3.Direction=DMA_PERIPH_TO_MEMORY
+Dma.SPI2_RX.3.EventEnable=DISABLE
+Dma.SPI2_RX.3.FIFOMode=DMA_FIFOMODE_DISABLE
+Dma.SPI2_RX.3.Instance=DMA1_Stream3
+Dma.SPI2_RX.3.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.SPI2_RX.3.MemInc=DMA_MINC_ENABLE
+Dma.SPI2_RX.3.Mode=DMA_NORMAL
+Dma.SPI2_RX.3.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.SPI2_RX.3.PeriphInc=DMA_PINC_DISABLE
+Dma.SPI2_RX.3.Polarity=HAL_DMAMUX_REQ_GEN_RISING
+Dma.SPI2_RX.3.Priority=DMA_PRIORITY_HIGH
+Dma.SPI2_RX.3.RequestNumber=1
+Dma.SPI2_RX.3.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
+Dma.SPI2_RX.3.SignalID=NONE
+Dma.SPI2_RX.3.SyncEnable=DISABLE
+Dma.SPI2_RX.3.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
+Dma.SPI2_RX.3.SyncRequestNumber=1
+Dma.SPI2_RX.3.SyncSignalID=NONE
+Dma.SPI2_TX.4.Direction=DMA_MEMORY_TO_PERIPH
+Dma.SPI2_TX.4.EventEnable=DISABLE
+Dma.SPI2_TX.4.FIFOMode=DMA_FIFOMODE_DISABLE
+Dma.SPI2_TX.4.Instance=DMA1_Stream4
+Dma.SPI2_TX.4.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.SPI2_TX.4.MemInc=DMA_MINC_ENABLE
+Dma.SPI2_TX.4.Mode=DMA_NORMAL
+Dma.SPI2_TX.4.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.SPI2_TX.4.PeriphInc=DMA_PINC_DISABLE
+Dma.SPI2_TX.4.Polarity=HAL_DMAMUX_REQ_GEN_RISING
+Dma.SPI2_TX.4.Priority=DMA_PRIORITY_HIGH
+Dma.SPI2_TX.4.RequestNumber=1
+Dma.SPI2_TX.4.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
+Dma.SPI2_TX.4.SignalID=NONE
+Dma.SPI2_TX.4.SyncEnable=DISABLE
+Dma.SPI2_TX.4.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
+Dma.SPI2_TX.4.SyncRequestNumber=1
+Dma.SPI2_TX.4.SyncSignalID=NONE
 Dma.SPI4_TX.0.Direction=DMA_MEMORY_TO_PERIPH
 Dma.SPI4_TX.0.EventEnable=DISABLE
@@ -248 +286 @@
 NVIC.DMA1_Stream1_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true\:true
 NVIC.DMA1_Stream2_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true\:true
+NVIC.DMA1_Stream3_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true\:true
+NVIC.DMA1_Stream4_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true\:true
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
 NVIC.EXTI9_5_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true\:true