source: ctrl/firmware/Main/SES/Core

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @92   3 months Zed Fixing project before changing MPU settings in CubeMX.
(edit) @91   3 months Zed ADC module was activated.
(edit) @90   3 months Zed Communication with M24256E EEPROM works.
(edit) @88   3 months Zed BME280 data transfer works ok. Device returns its ID 0x60.
(edit) @87   3 months Zed RTC is working.
(edit) @86   3 months Zed
(edit) @85   3 months Zed Fixing project before adding 1Wire port in CubeMX.
(edit) @84   3 months Zed Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
(edit) @83   3 months Zed Modbus Master and Slave Hardware were tested.
(edit) @82   3 months Zed DMA transfer to µSD-card was implemented.
(edit) @80   3 months Zed Added main SYS_DATA structure.
(edit) @79   3 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   3 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   3 months Zed LwIP was removed from the project.
(edit) @76   3 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   3 months Zed FatFs? is working, but without DMA.
(edit) @74   3 months Zed FatFs? with DMA were implemented.
(edit) @73   3 months Zed FreeRTOS can be compiled without errors.
(edit) @69   4 months Zed NetX can be compiled and initialized.
(edit) @68   4 months Zed Fixing project before Ethernet implementation.
(edit) @67   4 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   4 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   4 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   4 months Zed USART3 TX DMA is working.
(edit) @63   4 months Zed Fixing project.
(edit) @62   4 months Zed GSM STATUS pin is working.
(edit) @61   4 months Zed GSM thread was added.
(edit) @60   4 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   4 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   5 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   5 months Zed FileX is working.
(add) @12   5 months Zed Added more files to the project.
Note: See TracRevisionLog for help on using the revision log.