Timeline
Feb 14, 2025:
- 3:46 PM Changeset [97] by
- DAC works.
- 1:48 PM Changeset [96] by
- ADC3 with DMA was implemented. DTS was activated.
- 12:15 PM Changeset [95] by
- Fixing project.
- 11:42 AM Changeset [94] by
- Fixing project.
- 9:14 AM Changeset [93] by
- Fixing project.
- 8:27 AM Changeset [92] by
- Fixing project before changing MPU settings in CubeMX.
Feb 13, 2025:
- 3:21 PM Changeset [91] by
- ADC module was activated.
Feb 12, 2025:
- 3:03 PM Changeset [90] by
- Communication with M24256E EEPROM works.
Feb 11, 2025:
- 4:29 PM Changeset [89] by
- Added basic I2C EEPROM support.
- 4:00 PM Changeset [88] by
- BME280 data transfer works ok. Device returns its ID 0x60.
- 1:59 PM Changeset [87] by
- RTC is working.
- 1:09 PM Changeset [86] by
Feb 10, 2025:
- 8:27 AM Changeset [85] by
- Fixing project before adding 1Wire port in CubeMX.
Feb 7, 2025:
- 2:56 PM Changeset [84] by
- Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
- 1:40 PM Changeset [83] by
- Modbus Master and Slave Hardware were tested.
Feb 6, 2025:
- 8:27 AM Changeset [82] by
- DMA transfer to µSD-card was implemented.
Feb 5, 2025:
- 9:37 AM Changeset [81] by
- Modbus Master and Slave interfaces were added.
Feb 4, 2025:
- 3:24 PM Changeset [80] by
- Added main SYS_DATA structure.
- 1:58 PM Changeset [79] by
- DHCP client can get IP-address from fritz!box
- 11:33 AM Changeset [78] by
- Fixing project to enable DMA for SPI2.
Feb 3, 2025:
- 3:27 PM Changeset [77] by
- LwIP was removed from the project.
Jan 31, 2025:
- 10:07 AM Changeset [76] by
- Fixing project before changing NSS control for SPI2 in CubeMX.
Jan 30, 2025:
- 8:24 AM Changeset [75] by
- FatFs? is working, but without DMA.
Jan 29, 2025:
- 1:36 PM Changeset [74] by
- FatFs? with DMA were implemented.
- 10:08 AM Changeset [73] by
- FreeRTOS can be compiled without errors.
Jan 28, 2025:
- 4:50 PM Changeset [72] by
- FreeRTOS was added to the project.
- 4:13 PM Changeset [71] by
- Fixing project before adding support for FreeRTOS.
- 4:06 PM Changeset [70] by
- AZRTOS and NetX were removed from the project.
Jan 23, 2025:
- 4:10 PM Changeset [69] by
- NetX can be compiled and initialized.
- 9:09 AM Changeset [68] by
- Fixing project before Ethernet implementation.
Jan 22, 2025:
- 4:41 PM Changeset [67] by
- FAN TACHO RPM was moved changed to use interrupt.
- 11:40 AM Changeset [66] by
- FAN PWM control and TACHO signal measuring are working.
Jan 21, 2025:
- 11:26 AM Changeset [65] by
- GSM, USB, BLE and GPS are working.
Note: See TracTimeline
for information about the timeline view.
